chip- and motortuning
Audi A3 8L 1.8T (150 PS) | AGU,ARZ,ARX,AUM,AQA | Year 09.1996 - 06.2003
Tell us the model and engine of your car and we will show you your perfect tuning!
Audi A3 8L 1.8T with 150 hp
With the Audi A3 8L (AGU), you have chosen an excellent car for engine tuning. It is ideal for boosting performance, as the tuning parts have been tested and perfected by us over many years.
BAR-TEK® is motorsport
BAR-TEK® is Europe's largest engine tuning store for VW and Audi performance upgrades and is run by a former racing professional with 10 years of Formula 1 experience. With him, your car is in the best hands.
facts & figures
this is your tuning! How much power would you like?
Standard power
Audi A3 8L 1.8T
150 PS / 110 kW
210 Nm
Stage 1
increased efficiency:
+ 40 PS
+ 100 Nm
Final output:
190 PS
310 Nm
What you need extra to make it last:
You don't need any additional components here. Simply install and have fun! Don't use longlife oil, our 10W-60 oil is better.
BAR-TEK® TIP!
We recommend filling up with 102 octane fuel. This will give your engine more power because it will knock less! The turbocharger should not be too old. The engine should be in good condition. The basics must be right. To reduce carbon deposits to a minimum and keep the engine clean, we recommend installing our oil catch tank kit with TÜV certification.
We recommend filling up with 102 octane fuel. This will give your engine more power because it will knock less! The turbocharger should not be too old. The engine should be in good condition. The basics must be right. To reduce carbon deposits to a minimum and keep the engine clean, we recommend installing our oil catch tank kit with TÜV certification.
Stage 2
increased efficiency:
+ 55 PS
+ 110 Nm
Final output:
205 PS
320 Nm
You need this extra so that it lasts a long time:
To get the extra power onto the road, you need a sports clutch, as the original clutch cannot transmit the power. For the conversion to our K04-01 upgrade turbocharger you need to install a racing catalytic converter and our upgrade mass airflow sensor. One downpipe is a must.
BAR-TEK® TIP!
If you already have a sports catalytic converter, an intake hose, and an upgraded intercooler installed, you can continue to use them. With an upgraded intercooler, you'll have full power available even in summer! If you want to reach 220 hp right away, order the Stage 3 tuning kit directly! This will save you money.
If you already have a sports catalytic converter, an intake hose, and an upgraded intercooler installed, you can continue to use them. With an upgraded intercooler, you'll have full power available even in summer! If you want to reach 220 hp right away, order the Stage 3 tuning kit directly! This will save you money.
Stage 3
increased efficiency:
+ 110 PS
+ 150 Nm
Final output:
260 PS
360 Nm
You need this extra to make it last a long time:
You also need a sports clutch here. For the conversion to our K04-01 upgrade turbocharger you need to install a racing catalytic converter and our upgrade mass airflow sensor. One downpipe is a must. Our 1.8T oil cooler ensures optimum operating temperatures.
BAR-TEK® TIP!
With the Stage 3 tuning kit, you get the advanced upgrade from Kit 2. This includes 380 cc injection nozzles, an upgrade manifold, and further optimized software! If you have already installed a downpipe, an intake hose, and an upgraded intercooler, you can continue to use them. With a large upgraded intercooler, you will have full power available even in summer!
With the Stage 3 tuning kit, you get the advanced upgrade from Kit 2. This includes 380 cc injection nozzles, an upgrade manifold, and further optimized software! If you have already installed a downpipe, an intake hose, and an upgraded intercooler, you can continue to use them. With a large upgraded intercooler, you will have full power available even in summer!
Stage 4
increased efficiency:
+ 170 PS
+ 190 Nm
Final output:
320 PS
400 Nm
You need this extra to make it last a long time:
To drive the full 320 hp power, you need to replace your conrods with an X-shaft conrods. A sports clutch kit is required to ensure that the hp also reaches the road. For the exhaust, you should go for a 76 mm exhaust system. The pump must be a upgrade, otherwise there is a risk of engine damage due to leaning.
BAR-TEK® TIP!
This conversion requires good software coordination. Another tip from us: Your brake system is no longer up to the high performance. You can convert to a Brembo 4-piston brake or the one from the Audi S3 8L.
This conversion requires good software coordination. Another tip from us: Your brake system is no longer up to the high performance. You can convert to a Brembo 4-piston brake or the one from the Audi S3 8L.
Stage 5
increased efficiency:
+ 516 hp
+ 598 Nm
Final output:
666 PS
808 Nm
What you need to make it last a long time:
We'll tell you what you need for 666 hp here shortly.
Repair Guide
Detailed instructions
Technical graphics
Practical tool tips
Cooling Guide
Stable performance
Increased tuning range
Longer service life
What you need to cool down your Audi A3 8L:
If you want to get the full performance out of your engine, you must not forget the cooling. Even a little extra power puts a lot of strain on your engine! The thermal load increases and affects all areas of your vehicle, even the gearbox suffers from the new Power. In the best-case scenario, the hard-earned power is reduced again; in the worst-case scenario, your engine suffers major damage. So that you can tune your engine safely and reliably, we provide you with everything you need for the perfect cooling. Although it is ideal to install all parts together in a cooling bundle, you don't necessarily have to order everything at once. Each product helps you to improve the cooling.
Turbo Guide
More engine power
Better combustion
More efficient engine use
The optimum turbocharger for your tuning project
The turbocharger is one of the most important tuning measures of all, as there is extreme performance potential in the compression ratio. That is why you will find all the turbos from the guides and suitable alternatives in this special turbo guide, for example if you prefer a specific manufacturer. We have also compiled a lot of information for you on the subject of turbocharger, which you should take a look at. In addition to the detailed turbo tips, there is also a page on running in engines correctly, turbo lag and, of course, our 14 turbo rules.
3 Years Warranty
3 Years Warranty
Racing engines from BAR-TEK ®
If you don't feel like tuning your engine yourself, you can also get a ready-tuned engine from us. Our racing engines are designed for maximum performance and maximum driving pleasure and leave nothing to be desired. The components included are optimally matched, finely balanced and suitable for the highest speeds. Because we use components from motorsport, for example forged pistons and steel connecting rods, our racing engines are extremely stable. This means you get a completely finished engine that not only delivers the full Power, but is also safe and has a long service life.
The performance figures given here are based on our experience and can only provide an indication. Every engine is different and many factors play a major role in the maximum performance that can be achieved. These include, for example, fuel, software tuning and mileage. Therefore, all information is without guarantee. Put your engine through its paces on our 1000 hp dynamometer.
For performance enthusiasts
Don't want to do the tuning yourself?
With our tuning bundles, you have all the important tuning products for your project at a glance. If you don't want to do the tuning yourself but don't want to sacrifice maximum performance, you should go to a tuning workshop you trust.
WORKSHOPS
INSTALLATION PARTNERS ALL OVER GERMANY
You can either come to us in Overath (NRW) and bring your car to our workshop or contact us and we will find the nearest service partner for you. Whatever is more comfortable and easier for you!
Are you unsure? We are happy to help you!
Your answers will be provided by our team!
our promise
Good reasons for BAR-TEK®
Audi A3 8L 1.8T tuning right from the start
We have been tuning the Audi A3 8L since it first came off the production line. Its simple overall concept makes it the ideal vehicle for hobby mechanics and self-tuners, but also allows professionals like us to really get the most out of it!
More about us
Parts specially developed for the Audi A3 8L 1.8T
We have optimized the A3 for the racetrack in many of our own projects and have installed and tested specially developed parts for this purpose. These are only available from BAR-TEK® and have also been approved by the TÜV. This allows us to guarantee maximum performance without sacrificing safety and long-lasting driving pleasure.
Our own developments
We know the teething troubles of the Audi A3 8L
We know all the teething troubles of the Audi A3 and eliminate them professionally and safely during tuning. In our store you will find many items that not only increase the performance of your engine, but also its durability.
To our tuning guides
YOUR TUNING EXPERT
BAR-TEK® - Your specialist for professional engine tuning
We love engines, performance and speed. Here you will find everything you need to increase the performance of your engine. Above all, professional engine tuning for VW and Audi is one of our specialties. We are also happy to advise you individually and show you on our test bench what you can get out of your car. We can also take over the tuning completely for you. Just give us a call!
Bartek
Bartek
Bartek
Bartek
