Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Average rating of 5 out of 5 stars
Injector nozzle service @ BAR-TEK®
- Checking the actual state
- External cleaning of the injection nozzle
- Create nozzle protocol
- etc.
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Engine starts badly
- Misfiring
- Rough and poor engine running
- increased fuel consumption
- Fault memory reports defect
- Pairing on flow rate
- Checking the actual condition
- Leak test
- Ultrasonic cleaning of the nozzle mechanism
- External cleaning of the injection nozzle
- Replacement of sealing rings and filters if possible
- Static and dynamic flow rate measurement
- Check jet pattern
- Create nozzle log
- Injector safe storage
- Select the injector to be tested, if you do not know which injector you have, then look at the pictures above.
- Now select the treatment (Express, Normal) and the number of nozzles to be checked.
- If you are sure that you have selected the right injectors and the right number, put everything in the shopping basket (want to have) and complete the purchase.
- Download the injector data sheet, fill it in and send it with the injectors to the address on the injector data sheet.
- We will now take care of the injector service, return despatch and everything else.
- Fits for Fits for
- Videos Videos
- Questions about the product Questions about the product
- Downloads Downloads
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accessories Accessories
- Recommendations
- GSPR GSPR
Professional testing and cleaning of injection nozzles and high-pressure injectors now available directly from us!
With our modern ASNU test bench (ASNU=As New), we offer a professional service for all electric petrol injection nozzles. The scope of the service includes cleaning in an ultrasonic bath to completely remove deposits such as combustion and additive residues from the injector mechanism. The flow rate of the injection nozzles is measured statically and dynamically, the jet pattern is checked and the flow rates are checked for uniformity. All injectors are supplied with new sealing rings, filters and a protocol.
When and why the injector service:
Even new injectors have a certain variation in the injection quantity! The manufacturers specify a tolerance of up to 8% as "normal". In the worst case, however, this can lead to incorrect injection quantities per cylinder. As a result, the cylinders are injected with different amounts of fuel and the engine does not run cleanly or damage may occur to piston or valves! Thanks to our ASNU injector test bench, we can also test new injectors and thus pair them optimally.
Included in the service:
We can test almost all injection nozzles and injectors, but NO DIESEL injectors.
We will send you a data sheet with the before/after values.
If we do not have the manufacturer's target values, the injectors are compared with each other and the percentage deviation between them is calculated.
Please pack piezo injectors carefully as they are very sensitive.
You will receive your piezo injectors back in a box specially designed for the injector.
How do I proceed once I have decided in favour of the injector service?
Price per injector! Please simply order the correct type of injector and quantity here and send the injectors to us. At least 2 injectors must always be sent in order to have a comparative value.
Important! Please print out and complete the injector data sheet under Quick Links.
Average rating of 5 out of 5 stars
Login
6 reviews
24 October 2022 00:00
Review with rating of 5 out of 5 stars
Super. Gerne wieder. (Quelle:
Super. Gerne wieder.
Source:
SHOPVOTE
25 January 2022 00:00
Review with rating of 5 out of 5 stars
Prompter kompetenter Service,jeder Zeit wiede
Prompter kompetenter Service,jeder Zeit wieder
Source:
SHOPVOTE
8 May 2021 00:00
Review with rating of 5 out of 5 stars
Keine,sehr schneller service! Top! (Quelle:
Keine,sehr schneller service!
Top!
Source:
SHOPVOTE
6 August 2020 00:00
Review with rating of 5 out of 5 stars
Es ist ein Versuch Wert bevor neue Injektoren
Es ist ein Versuch Wert bevor neue Injektoren verbaut werden. Mein Motor läuft wieder ruhig und ohne Fehlermeldung.
Source:
SHOPVOTE
Accessories
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Professional testing and cleaning of injection nozzles and high-pressure injectors now available directly from us!
With our modern ASNU test bench (ASNU=As New), we offer a professional service for all electric petrol injection nozzles. The scope of the service includes cleaning in an ultrasonic bath to completely remove deposits such as combustion and additive residues from the injector mechanism. The flow rate of the injection nozzles is measured statically and dynamically, the jet pattern is checked and the flow rates are checked for uniformity. All injectors are supplied with new sealing rings, filters and a protocol.
When and why the injector service:
- Engine starts badly
- Misfiring
- Rough and poor engine running
- increased fuel consumption
- Fault memory reports defect
- Pairing on flow rate
Even new injectors have a certain variation in the injection quantity! The manufacturers specify a tolerance of up to 8% as "normal". In the worst case, however, this can lead to incorrect injection quantities per cylinder. As a result, the cylinders are injected with different amounts of fuel and the engine does not run cleanly or damage may occur to piston or valves! Thanks to our ASNU injector test bench, we can also test new injectors and thus pair them optimally.
Included in the service:
- Checking the actual condition
- Leak test
- Ultrasonic cleaning of the nozzle mechanism
- External cleaning of the injection nozzle
- Replacement of sealing rings and filters if possible
- Static and dynamic flow rate measurement
- Check jet pattern
- Create nozzle log
- Injector safe storage
We can test almost all injection nozzles and injectors, but NO DIESEL injectors.
We will send you a data sheet with the before/after values.
If we do not have the manufacturer's target values, the injectors are compared with each other and the percentage deviation between them is calculated.
Please pack piezo injectors carefully as they are very sensitive.
You will receive your piezo injectors back in a box specially designed for the injector.
How do I proceed once I have decided in favour of the injector service?
- Select the injector to be tested, if you do not know which injector you have, then look at the pictures above.
- Now select the treatment (Express, Normal) and the number of nozzles to be checked.
- If you are sure that you have selected the right injectors and the right number, put everything in the shopping basket (want to have) and complete the purchase.
- Download the injector data sheet, fill it in and send it with the injectors to the address on the injector data sheet.
- We will now take care of the injector service, return despatch and everything else.
Price per injector! Please simply order the correct type of injector and quantity here and send the injectors to us. At least 2 injectors must always be sent in order to have a comparative value.
Important! Please print out and complete the injector data sheet under Quick Links.
Average rating of 5 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
6 reviews
24 October 2022 00:00
Review with rating of 5 out of 5 stars
Super. Gerne wieder. (Quelle:
Super. Gerne wieder.
Source:
SHOPVOTE
25 January 2022 00:00
Review with rating of 5 out of 5 stars
Prompter kompetenter Service,jeder Zeit wiede
Prompter kompetenter Service,jeder Zeit wieder
Source:
SHOPVOTE
8 May 2021 00:00
Review with rating of 5 out of 5 stars
Keine,sehr schneller service! Top! (Quelle:
Keine,sehr schneller service!
Top!
Source:
SHOPVOTE
6 August 2020 00:00
Review with rating of 5 out of 5 stars
Es ist ein Versuch Wert bevor neue Injektoren
Es ist ein Versuch Wert bevor neue Injektoren verbaut werden. Mein Motor läuft wieder ruhig und ohne Fehlermeldung.
Source:
SHOPVOTE
Accessories
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
