2.0L Motor-Tuning-Guides
Tuning Guides
Tuning Guide for 2.0L TFSI with K03-Turbo
Professional tuning for your 2.0 TFSI in five tuning stages
Tuning guide for 2.0L TFSI engines with K03 turbo
Up to 480 PS for all 2.0l TFSI engines of the EA113 series with timing belt and 200 PS (147 kW) as standard – That’s what you get with this tuning guide! We show you how to get up to 480 PS (353 kW) out of your engine safely and reliably. All the parts are perfectly matched and divided into four tuning stages, to ensure you get maximum performance.
Of course, you can also take a direct look at all performance parts for 2.0 TFSI EA113 engines.
Installed in:
- Golf 5 GTI
- Audi A3
- Audi TT
- Seat
Year of manufacture:
2004 – 2008
Engine Codes (all with K03 turbo):
- AXX
- BWA
- BWE
- BPY
Stage 1
increased efficiency:
+ 40 PS
+ 80 Nm
Final output:
240 PS
360 Nm
You need this extra to make it last:
You don't need any additional components here. Simply install and have fun! But you should not use Longlife oil. Instead, use our fully synthetic turbo oil.
We also recommend our Oil Catchtank Kit + PCV Fix with TÜV!
BAR-TEK® TIP!
To ensure that your engine knocks less and therefore gets more power, we recommend fuel with 102 octane. In addition, the turbocharger should not be too old. The engine should also be in good condition: This is the best basis for chip tuning. Always check the diverter valve!
To ensure that your engine knocks less and therefore gets more power, we recommend fuel with 102 octane. In addition, the turbocharger should not be too old. The engine should also be in good condition: This is the best basis for chip tuning. Always check the diverter valve!
Stage 2
increased efficiency:
+ 65 PS
+ 120 Nm
Final output:
265 PS
400 Nm
You need this extra to make it last:
You will need a reinforced sports clutch so that you can transfer the power to the road. The original clutch cannot handle the increased torque. An oil cooler must be installed to ensure sufficient cooling. You can obtain this from us as a plug & play oil cooler kit for the 2.0L TFSI. We also recommend our high-performance ignition coils. The original ignition coils are very sensitive and could lead to misfiring at this power.
BAR-TEK® TIP!
If you have already installed a downpipe, an upgrade intercooler and an upgrade high-pressure pump, you can continue to use them.
If you have already installed a downpipe, an upgrade intercooler and an upgrade high-pressure pump, you can continue to use them.
Stage 3
increased efficiency:
+ 150 PS
+ 180 Nm
Final output:
350 PS
460 Nm
You need this extra to make it last:
You need a reinforced sports clutch so that you can bring the power to the road. The original clutch can't handle the increased torque. For sufficient cooling, an oil cooler must be installed. You can get this from us as a plug & play oil cooler kit for the 2.0L TFSI. We also recommend our high performance ignition coils. The original ignition coils are very sensitive and could lead to misfiring.
BAR-TEK® TIP!
If you have already installed a downpipe, an upgrade intercooler and an upgrade high-pressure pump, you can continue to use them.
If you have already installed a downpipe, an upgrade intercooler and an upgrade high-pressure pump, you can continue to use them.
Stage 4
increased efficiency:
+ 220 PS
+ 210 Nm
Final output:
420 PS
490 Nm
You need this extra to make it last:
Now it's time for reinforced pistons and connecting rods. With forged pistons and steel h-beam connecting rods you can drive the V2 tuning kit to 420 PS stable and safe! High loads and more boost pressure are no longer a problem. In addition, you need a reinforced sports clutch with a single mass flywheel that withstands the higher torque. For vehicles with DSG transmission, the DSG software must be adapted. More engine power also generates more heat, so a higher oil temperature. To prevent your engine oil from overheating and to ensure that your engine always has the optimum temperature and oil quality, you'll need our oil cooler kit! We also recommend our high performance ignition coils.
BAR-TEK® TIP!
The following parts are absolutely necessary: Downpipe, upgrade charge air cooler and an upgrade high-pressure pump.
If you have already installed the parts, you can simply continue to use them. A good chip tuning is required for this upgrade.
The following parts are absolutely necessary: Downpipe, upgrade charge air cooler and an upgrade high-pressure pump.
If you have already installed the parts, you can simply continue to use them. A good chip tuning is required for this upgrade.
Stage 5
increased efficiency:
+ 280 PS
+ 320 Nm
Final output:
480 PS
600 Nm
You need this extra to ensure it lasts a long time:
Now is the time for reinforced pistons and connecting rods. With forged pistons and steel H-shaft connecting rods, you can ride the V3 tuning kit to 480 PS (353 kW) in a stable and safe manner! High loads and more boost pressure are no longer a problem. You will also need a reinforced sports clutch with an EMS that can withstand the higher torque. For vehicles with a DSG gearbox, the DSG software must be adapted. You can simply contact us for this. More engine power also generates more heat, which means a higher oil temperature. To ensure that your engine oil does not overheat and that your engine always has an optimum temperature and oil condition, you also need our oil cooler kit! We also recommend our high-performance ignition coils.
BAR-TEK® TIP!
The following parts are essential here: Downpipe, upgrade intercooler and an upgrade high-pressure pump.
If you have already installed the parts, you can simply continue to use them. Good software tuning is required for this conversion.
The following parts are essential here: Downpipe, upgrade intercooler and an upgrade high-pressure pump.
If you have already installed the parts, you can simply continue to use them. Good software tuning is required for this conversion.
Engine repair guide VW Golf 5 TFSI
Articlenumber:
2100748.2
All data at a glance
One less source of error
Detailed instructions
Technical drawings
Ready to ship immediately!
Cooling guide
increased efficiency:
Final output:
This is how you improve the cooling:
If you want to get the full power out of your 2.0L TFSI with K03 turbo, you must not forget the cooling. Even a little extra power puts a significant strain on your engine! The thermal load increases and affects all areas of your vehicle, even the transmission suffers from the new power. At best, the hard-earned power is reduced again; at worst, your engine suffers major damage. So that you can tune your engine safely and reliably, we provide you with everything you need for perfect cooling. Although it is ideal to install all parts together in a cooling bundle, you don't necessarily have to order everything at once. Each product helps you to improve cooling.
Turbo guide
increased efficiency:
Final output:
Improved support
More power!
Better durability
Delivery time 90 days
Engine power up to 420 hp!
Loader is balanced
Plug & Play for 2.0L TFSI
Ready to ship immediately!
Tip
Engine power up to 480 hp!
balanced to the smallest tolerances
Plug & Play
Ready to ship immediately!
Up to 650 PS
Garrett G30-990 Base
The most extreme and strongest
0.72
0.92
G25-550
G25-660
... and more!
Ready to ship immediately!
2.0L TFSI EA113 racing engine complete over 500 PS capable BAR-TEK®
Articlenumber:
23tfsi01
2.0 Liter
simply plug and play
over 600 hp steady
Can be delivered in 5 to 8 days
These results are based on our experience, therefore we can only give a tendency. Many factors play an important role in the maximum possible performance of an engine. In addition to the fuel used, these include, for example, software tuning and mileage.
We look forward to hearing from you
We will also be happy to answer your questions about tuning in our help center. We look forward to hearing from you!
His first car was a Polo Mk1 with a 40 Weber twin carburetor and 129 PS (95 kW). His second was an Audi 50. Today Bartek tunes Lamborghinis to 1000 PS (735 kW). Even as a young boy, Bartek disassembled vehicles and put everything back together better. He wrote his high school diploma with oil on his fingers. The trained automotive mechanic with a focus on engines and gearboxes was determined to go into motorsports. In his 10 years in Formal 1, he supervised 73 races, including as engine mechanic for Ralf Schumacher at Toyota. Since 2010, he has dedicated himself fully to his company BAR-TEK® and helps his customers to bring VW and Audi engines to peak performance.
Expert in
Engine
Gearbox
YOUR TUNING EXPERT
BAR-TEK®
–
Your specialist for professional Engine tuning
We love engines, performance and speed. Here you will find everything
you need to increase the performance of your engine. Especially the
professional engine tuning for VW and Audi is one of our specialties. We
are also happy to advise you individually and show you on our
dynamometer, what you can get out of your car. In addition, we take over
the tuning completely for you. Just give us a call!
Bartek
Bartek
Bartek
Bartek
Europe's No. 1 in engine tuning
Europe's largest store for Audi and VW engine tuning.
Same day shipping
Orders before 12 o'clock go out the same day.
All items are BAR-TEK®
proved
All items are tested and checked by us.
15 years of engine tuning experience
Of which 10 years in the top class of motorsports!
