Turbo Inlets: More boost for your turbocharger
Your turbo inlet connects the air filter or airbox with your turbocharger. Here, the air must be able to flow through in an appropriately fluid manner so that your turbo is constantly supplied and the power comes through fully. We can supply you with the right turbo inlets for extreme performance that the standard parts cannot cope with. They provide improved intake because the resistance is noticeably reduced. In addition to the improved flow, the volume is also increased so that more air can flow into your turbo more quickly. This allows you to run high boost pressures and the turbo still has to work less.
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Ready to ship immediately!
Ready to ship immediately!
Ready to ship immediately!
Delivery time 60 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Ready to ship immediately!
Flow-oriented intake manifolds
The special thing about the inlet manifold is that it reduces the diameter on the way from the intake hose to the turbo. That's why performance tuning isn't just about increasing the size - your turbo inlet has to be flow-oriented. We achieve this by using cast inlet bends, for example, whose intake angles are designed for optimum air flow. Our inlets made of multi-layer silicone are also always designed to give you maximum performance and driving pleasure. At the same time, the turbo is also relieved and the turbine has more reserves.
Turbo Inlets for all requirements
With us you will find the right part for your individual requirements. All inlets in our shop are made for use in motorsport. Compared to the standard parts, they are made of materials that match the high performance. For example, our reinforced Turbo Inlet for 1.8L & 2.0L TSI. This is made of four layers of silicone and fabric and cannot become porous and contract. The surface is streamlined, which you can feel directly in the response and driving pleasure. The same applies to our inlet for all 1.8L & 2.0L EA888 3rd generation. However, this is cast from aluminium and CNC-machined. With this inlet you increase the air flow by more than 50% compared to the standard part. We have gone one better with our 2.5L TFSI Audi RS3 8V & TTRS 8S Upgrade Turbo Inlet: In addition to the increased air mass by 50%, we have managed to increase the flow rate by 30%. This gives you up to 30 hp more power and you can easily drive 600 hp.