We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
The THOR 650 turbocharger is suitable for all 2.0L EA113 timing belt engines as well as the 1st and 2nd generation 2.0 EA888 engines.
Based on a reverse-rotating Garrett G25-550 or 660 turbocharger, we achieve up to 660 hp with near-series connection. Compared to K04 turbochargers or the well-known EFR turbochargers, the exhaust gases are directed onto the turbine wheel in a flow-optimised manner. This ensures significantly improved response behaviour and much higher efficiency than with other turbochargers.
The manifold has been specially designed for the new G25, G30 and G35 series with integrated wastegate from Garrett. Thanks to the modern and sophisticated exhaust gas routing, a particularly high level of efficiency can be achieved in conjunction with reverse turbochargers. The integrated sprue is used to accommodate a temperature or back pressure sensor. The internal wastegate of the G series makes it easy to convert. The manifold, which is manufactured in mass production quality, can withstand temperatures of up to 1050° degrees thanks to stainless steel and is also a visual treat.
For outputs up to 550 hp, we recommend an exhaust housing with 0.72 A/R. From 550 hp, the exhaust housing with 0.92 A/R should be used.
Features:
Calibrated wastegate servomotor
Latest CFD-optimised, milled and forged high-performance compressor wheel
State-of-the-art turbine wheel design made of MAR-M high-performance material for 1050 °C
Stainless steel exhaust casing for 1050 °C
Sprue for speed sensor or pressure sensor
Ceramic double ball bearing
Double piston ring seal on compressor and turbine side
Direction of rotation: Reverse left
You can keep your old turbocharger. No replacement necessary. This means you can rebuild the vehicle if necessary. This ultimately saves a lot of time and money.
Attention: In addition to an engine modified for this performance, this turbocharger also requires further modifications such as to the suction, downpipe, oil and water lines, fuel supply and new software. The installation of performance-enhancing components requires careful handling and specialised knowledge. The engine and the entire drive train must be in a performance-orientated condition in order to achieve the maximum possible performance.
We now offer a 3-year guarantee on this Turbo-Total upgrade - turbocharger! As we are convinced of our products beyond measure, we offer you this extra service. Thanks to our more than 30 years of experience at Turbo-Total and the constant exchange and close cooperation with Garrett, we can offer you this extra service. You can find more information about the guarantee here.
The THOR 650 turbocharger is suitable for all 2.0L EA113 timing belt engines as well as the 1st and 2nd generation 2.0 EA888 engines.
Based on a reverse-rotating Garrett G25-550 or 660 turbocharger, we achieve up to 660 hp with near-series connection. Compared to K04 turbochargers or the well-known EFR turbochargers, the exhaust gases are directed onto the turbine wheel in a flow-optimised manner. This ensures significantly improved response behaviour and much higher efficiency than with other turbochargers.
The manifold has been specially designed for the new G25, G30 and G35 series with integrated wastegate from Garrett. Thanks to the modern and sophisticated exhaust gas routing, a particularly high level of efficiency can be achieved in conjunction with reverse turbochargers. The integrated sprue is used to accommodate a temperature or back pressure sensor. The internal wastegate of the G series makes it easy to convert. The manifold, which is manufactured in mass production quality, can withstand temperatures of up to 1050° degrees thanks to stainless steel and is also a visual treat.
For outputs up to 550 hp, we recommend an exhaust housing with 0.72 A/R. From 550 hp, the exhaust housing with 0.92 A/R should be used.
Features:
Calibrated wastegate servomotor
Latest CFD-optimised, milled and forged high-performance compressor wheel
State-of-the-art turbine wheel design made of MAR-M high-performance material for 1050 °C
Stainless steel exhaust casing for 1050 °C
Sprue for speed sensor or pressure sensor
Ceramic double ball bearing
Double piston ring seal on compressor and turbine side
Direction of rotation: Reverse left
You can keep your old turbocharger. No replacement necessary. This means you can rebuild the vehicle if necessary. This ultimately saves a lot of time and money.
Attention: In addition to an engine modified for this performance, this turbocharger also requires further modifications such as to the suction, downpipe, oil and water lines, fuel supply and new software. The installation of performance-enhancing components requires careful handling and specialised knowledge. The engine and the entire drive train must be in a performance-orientated condition in order to achieve the maximum possible performance.
We now offer a 3-year guarantee on this Turbo-Total upgrade - turbocharger! As we are convinced of our products beyond measure, we offer you this extra service. Thanks to our more than 30 years of experience at Turbo-Total and the constant exchange and close cooperation with Garrett, we can offer you this extra service. You can find more information about the guarantee here.