Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Billet machined from solid
- Black anodized for better corrosion protection
- 80° thermostat
- With 1/8 NPT port for temperature or oil pressure gauge (see accesories)
- Overall height: 32 mm
- Dash 8 fittings (internal thread in the flange M18x1.5)
- Fits for Fits for
- Videos Videos
- Questions about the product Questions about the product
- Downloads Downloads
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- accesories accesories
- Recommendations
- GSPR GSPR
- Warranty Warranty
Best oil cooler flange with thermostat developed by BAR-TEK®. This adapter is a must for optimal oil cooling on tuned engines.
Features:
Very easy to install thanks to the specially made screw for a 12 mm hex socket. (way easier than the 26 mm socket needed with other brands)
Delivered without any additional accesories. Since there are now several different thread bolts, we supply our flange without an extra screw. You’ll find a selection of screws under accesories.
For more information click HERE
NPT threads are theoretically self-sealing. Sealing is achieved via the increasing diameter and thus the flanks of the thread. However, depending on manufacturing tolerances, material, and the quality of the existing thread, in practice a 100% seal cannot always be guaranteed. Therefore, even with NPT threads we always recommend using a chemical thread sealant.
Average rating of 5 out of 5 stars
Login
2 - 10 of 11 reviews
9 May 2022 00:00
Review with rating of 5 out of 5 stars
Sehr gute Qualität
Sehr gute Qualität
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Best oil cooler flange with thermostat developed by BAR-TEK®. This adapter is a must for optimal oil cooling on tuned engines.
Features:
- Billet machined from solid
- Black anodized for better corrosion protection
- 80° thermostat
- With 1/8 NPT port for temperature or oil pressure gauge (see accesories)
- Overall height: 32 mm
- Dash 8 fittings (internal thread in the flange M18x1.5)
Very easy to install thanks to the specially made screw for a 12 mm hex socket. (way easier than the 26 mm socket needed with other brands)
Delivered without any additional accesories. Since there are now several different thread bolts, we supply our flange without an extra screw. You’ll find a selection of screws under accesories.
For more information click HERE
NPT threads are theoretically self-sealing. Sealing is achieved via the increasing diameter and thus the flanks of the thread. However, depending on manufacturing tolerances, material, and the quality of the existing thread, in practice a 100% seal cannot always be guaranteed. Therefore, even with NPT threads we always recommend using a chemical thread sealant.
Average rating of 5 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
2 - 10 of 11 reviews
9 May 2022 00:00
Review with rating of 5 out of 5 stars
Sehr gute Qualität
Sehr gute Qualität
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany