Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Knock monitor V3 PLEX® tuning
- V3 - latest development
- Knock detection
- engine optimization
- Full-spectrum CAN bus data logger
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Knock detection analysis of vibrations
- General data acquisition
- Data acquisition on the test bench
- Engine optimization
- 2.8-inch IPS display with high brightness
- Easy configuration directly on the device
- Powerful multi-core processor and new dedicated audio DSP
- Multi-channel CAN-bus data logging
- Unlimited USB data logging
- Next-generation knock detection with gain/cylinder
- Decoding of the engine block signal
- Hi-fi audio recording and playback function
- Fits for Fits for
- Videos Videos
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- accesories accesories
- Recommendations
- GSPR GSPR
Professional tuning at the highest level. Never Miss a Knock again!
The ultimate tuning tool and at the same time one of the few really working knock tools available on the market.
The Plex Knock Monitor V3 is a completely revised professional knock detection device and at the same time a full-spectrum CAN-bus data logger for dyno tuners.
Equipped with a powerful multi-core processor and a dedicated high-fidelity DSP, it detects knock precisely: cylinder-dependent gain, clear signal windowing and decoding of the engine block signal, supported by numerous OEM trigger patterns.
The new, more compact aluminum housing offers a sharp 2.8-inch TFT IPS color display and a practical membrane keyboard.
The improved industrial M8 wiring and connector system, the 100 Mbit Ethernet port and the USB data logging make it ready for immediate use.
In addition, the PKM V3 is compatible with the PLEX Device Manager V2 and the PLEX PDA-WIN data analysis software – for seamless workflows.
Available as Basic or HD version with one or two sensors and advanced PC analysis and configuration software.
Application range:
Features:
For technical information see the data sheet under Downloads.
Average rating of 0 out of 5 stars
Login
accesories
Average rating of 0 out of 5 stars
Delivery time 1 - 3 days
Manufacturer
Information about the manufacturer
PLEX TUNING
PLEX TUNING O.E.
5km Varis koropiou Avenue, 19400 Koropi - GREECE
Professional tuning at the highest level. Never Miss a Knock again!
The ultimate tuning tool and at the same time one of the few really working knock tools available on the market.
The Plex Knock Monitor V3 is a completely revised professional knock detection device and at the same time a full-spectrum CAN-bus data logger for dyno tuners.
Equipped with a powerful multi-core processor and a dedicated high-fidelity DSP, it detects knock precisely: cylinder-dependent gain, clear signal windowing and decoding of the engine block signal, supported by numerous OEM trigger patterns.
The new, more compact aluminum housing offers a sharp 2.8-inch TFT IPS color display and a practical membrane keyboard.
The improved industrial M8 wiring and connector system, the 100 Mbit Ethernet port and the USB data logging make it ready for immediate use.
In addition, the PKM V3 is compatible with the PLEX Device Manager V2 and the PLEX PDA-WIN data analysis software – for seamless workflows.
Available as Basic or HD version with one or two sensors and advanced PC analysis and configuration software.
Application range:
- Knock detection analysis of vibrations
- General data acquisition
- Data acquisition on the test bench
- Engine optimization
Features:
- 2.8-inch IPS display with high brightness
- Easy configuration directly on the device
- Powerful multi-core processor and new dedicated audio DSP
- Multi-channel CAN-bus data logging
- Unlimited USB data logging
- Next-generation knock detection with gain/cylinder
- Decoding of the engine block signal
- Hi-fi audio recording and playback function
For technical information see the data sheet under Downloads.
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
accesories
Average rating of 0 out of 5 stars
Delivery time 1 - 3 days
Information about the manufacturer
PLEX TUNING
PLEX TUNING O.E.
5km Varis koropiou Avenue, 19400 Koropi - GREECE