Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
TÜV included
Includes parts certificate for the TÜV
TÜV certified
This component comes with a TÜV parts certificate so that you can install and enjoy it straight away. Please note that the TÜV certificate does not necessarily apply to every engine of a particular type. Some developments and performance levels are so new that the certificates are only offered later by the manufacturers. Please first take a look at the PDF document that you can find under “Downloads”. It states exactly which engine codes and vehicles the TÜV certification applies to.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
TÜV included
Includes parts certificate for the TÜV
TÜV certified
This component comes with a TÜV parts certificate so that you can install and enjoy it straight away. Please note that the TÜV certificate does not necessarily apply to every engine of a particular type. Some developments and performance levels are so new that the certificates are only offered later by the manufacturers. Please first take a look at the PDF document that you can find under “Downloads”. It states exactly which engine codes and vehicles the TÜV certification applies to.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
2.0 TFSI Intercooler pressure pipe kit for K03 and K04 turbocharger
With our 2.0 TFSI pressure pipe kit, you have the perfect connection from the turbo to the intercooler in S3 technology. The original pipes are made of plastic and are so narrow that the air flow is obstructed. Especially with tuned engines, performance is lost!
Our boost pipes, on the other hand, come with an aluminium turbo outlet and four-layer silicone hose connectors. They are bent in such a way that they allow the highest flow rate. This significantly improves the response behaviour of the turbo. You get more power, torque and durability. And of course, driving is much more fun!
Naturally, our hoses are designed to withstand even the highest temperatures with ease. Thanks to the durable powder coating, you also have the high-quality OEM look.
Features:
2.25" (57 mm) aluminium tubing
2.5" (63.5 mm) power tube
OEM bracket
CNC Aluminium turbo outlet
Durable powder coating
4-layer black silicone hoses
Complete all-round carefree package
Optionally with TÜV certificate (only for vehicles with standard K04 turbocharger)
The kit includes:
Turbo pressure pipe
Power pipe, powder-coated
Silicone hose for the power pipe
Silicone hose from the turbo to the drain pipe
Silicone hose from the drain pipe to the intercooler
CNC Aluminium turbo outlet
Hose clamps
Screws for the map sensor
Optional TÜV certificate
Important: The BAR-TEK 2.0 TFSI pressure pipe kit naturally also fits the TFSI with K03 supercharger such as e. g. in the Golf 5 GTI, Jetta or A3. The certificate is not valid for vehicles with a K03 turbo.
If a upgrade- intercooler is installed, the hose between intercooler and the pressure pipe from upgrade- intercooler must also be used.
Vehicles with the original S3 intercooler require a special hose for connection to the S3 intercooler. You can simply select this as an option!
If you have an original intercooler with "click lock", you will need our click adapter to connect the silicone hose to the OEM radiator. You can find this at accesories.
The certificate for the TÜV is only valid for some models. If you come from DE / AT and need an expert opinion, please first have a look at the PDF document that you can find under "Downloads".
Do you have questions about the product?Just start the chat, we will help you with your product selection.
2.0 TFSI Intercooler pressure pipe kit for K03 and K04 turbocharger
With our 2.0 TFSI pressure pipe kit, you have the perfect connection from the turbo to the intercooler in S3 technology. The original pipes are made of plastic and are so narrow that the air flow is obstructed. Especially with tuned engines, performance is lost!
Our boost pipes, on the other hand, come with an aluminium turbo outlet and four-layer silicone hose connectors. They are bent in such a way that they allow the highest flow rate. This significantly improves the response behaviour of the turbo. You get more power, torque and durability. And of course, driving is much more fun!
Naturally, our hoses are designed to withstand even the highest temperatures with ease. Thanks to the durable powder coating, you also have the high-quality OEM look.
Features:
2.25" (57 mm) aluminium tubing
2.5" (63.5 mm) power tube
OEM bracket
CNC Aluminium turbo outlet
Durable powder coating
4-layer black silicone hoses
Complete all-round carefree package
Optionally with TÜV certificate (only for vehicles with standard K04 turbocharger)
The kit includes:
Turbo pressure pipe
Power pipe, powder-coated
Silicone hose for the power pipe
Silicone hose from the turbo to the drain pipe
Silicone hose from the drain pipe to the intercooler
CNC Aluminium turbo outlet
Hose clamps
Screws for the map sensor
Optional TÜV certificate
Important: The BAR-TEK 2.0 TFSI pressure pipe kit naturally also fits the TFSI with K03 supercharger such as e. g. in the Golf 5 GTI, Jetta or A3. The certificate is not valid for vehicles with a K03 turbo.
If a upgrade- intercooler is installed, the hose between intercooler and the pressure pipe from upgrade- intercooler must also be used.
Vehicles with the original S3 intercooler require a special hose for connection to the S3 intercooler. You can simply select this as an option!
If you have an original intercooler with "click lock", you will need our click adapter to connect the silicone hose to the OEM radiator. You can find this at accesories.
The certificate for the TÜV is only valid for some models. If you come from DE / AT and need an expert opinion, please first have a look at the PDF document that you can find under "Downloads".
Do you have questions about the product?Just start the chat, we will help you with your product selection.