Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
3.0L TFSI Audi S4/S5 B9 upgrade Turbocharger up to 650 HP Turbo-Total
- Turbocharger up to 650 HP
- for 3.0L TFSI Audi S4/S5 B9
- Plug and Play
- Billet compressor impeller
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Larger billet compressor impeller
- Cut back turbine wheel
- Reinforced hydrodynamic plain bearing
- CNC machined compressor housing
- Highspeed fine balancing
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accessories Accessories
- Recommendations
- GSPR GSPR
The Turbo-Total upgrade supercharger was developed as a direct upgrade for the Audi S4 and S5 B9 with 3.0L TFSI V6 engine.
The turbocharger is refined with a high performance compressor impeller and exhaust side with cut back turbine wheel. This allows for high engine performance with minimal input. Designed for healthy performance and extremely early throttle response, these turbochargers are probably the best solution to breathe some serious extra power into your V6. All Y-pipes as well as the most common tuning accessories fit perfectly to the supercharger. With a small amount of work and moderate changes can be achieved so a noble tuning in original appearance and quality.
Features:
The turbochargers were already adjusted at the factory. The actuators were adjusted and calibrated during the manufacturing process. Turbochargers calibrated in this way at the factory require no further adjustments and are ready for immediate installation.
Attention: Software optimization is mandatory to achieve the specified engine performance. No approval within the range of the StVZO.
If you want to convert your turbo, this requires that the supercharger housings are in perfect condition and have no cracks or the like.
The installation of performance-enhancing components requires careful handling and expert knowledge. The engine and the entire drivetrain must be in a performance-compliant condition to achieve the maximum possible performance.
We now offer a 3-year warranty on this Turbo-Total Upgrade-Turbocharger! Since we are convinced of our product beyond measure, we offer you this extra service. Thanks to our more than 30 years of experience with the Turbo-Total and the constant exchange and close coorperation with Garrett, we can offer you this extra service. You can find more information about the warranty here.
Average rating of 0 out of 5 stars
Login
Accessories
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
The Turbo-Total upgrade supercharger was developed as a direct upgrade for the Audi S4 and S5 B9 with 3.0L TFSI V6 engine.
The turbocharger is refined with a high performance compressor impeller and exhaust side with cut back turbine wheel. This allows for high engine performance with minimal input. Designed for healthy performance and extremely early throttle response, these turbochargers are probably the best solution to breathe some serious extra power into your V6. All Y-pipes as well as the most common tuning accessories fit perfectly to the supercharger. With a small amount of work and moderate changes can be achieved so a noble tuning in original appearance and quality.
Features:
- Larger billet compressor impeller
- Cut back turbine wheel
- Reinforced hydrodynamic plain bearing
- CNC machined compressor housing
- Highspeed fine balancing
The turbochargers were already adjusted at the factory. The actuators were adjusted and calibrated during the manufacturing process. Turbochargers calibrated in this way at the factory require no further adjustments and are ready for immediate installation.
Attention: Software optimization is mandatory to achieve the specified engine performance. No approval within the range of the StVZO.
If you want to convert your turbo, this requires that the supercharger housings are in perfect condition and have no cracks or the like.
The installation of performance-enhancing components requires careful handling and expert knowledge. The engine and the entire drivetrain must be in a performance-compliant condition to achieve the maximum possible performance.
We now offer a 3-year warranty on this Turbo-Total Upgrade-Turbocharger! Since we are convinced of our product beyond measure, we offer you this extra service. Thanks to our more than 30 years of experience with the Turbo-Total and the constant exchange and close coorperation with Garrett, we can offer you this extra service. You can find more information about the warranty here.
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accessories
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
