Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
3.0 TFSI EA839 upgrade - high-pressure pump from BAR-TEK ®
- 50% more power than a standard pump!
- A must-have for tuned TFSI engines
- Tested up to 8500 rpm
- Installation Plug & Play
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Increases fuel pressure thanks to
- a
- larger piston
- diameter Standard piston: 10mm, Upgrade piston diameter: 11.5 mm
- Less wear and friction thanks to DLC coating
- 50% more power than the standard pump
- A must-have for tuned TFSI engines
- Tested up to 8500 RPM
- Plug & Play installation
- Fits for Fits for
- Audi A4 / S4 / RS4 B8 (Type 8K) | Year built 2007-2015 3.0 TFSI (EA837) CAKA | 333 hp (245 kW)
- Audi A4 / S4 / RS4 B8 (Type 8K) | Year built 2007-2015 3.0 TFSI (EA837) CCBA | 333 hp (245 kW)
- Audi A4 / S4 / RS4 B8 (Type 8K) | Year built 2007-2015 3.0 TFSI (EA837) CMUA | 272 hp (200 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CAKA | 333 hp (245 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CCBA | 333 hp (245 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CMUA | 272 hp (200 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CREC | 333 hp (245 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 3.0 TFSI (EA837) CGWD | 310 hp (228 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 3.0 TFSI (EA837) CGXB | 310 hp (228 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 3.0 TFSI (EA837) CREC | 333 hp (245 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 3.0 TFSI (EA837) CGWD | 310 hp (228 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 3.0 TFSI (EA837) CGXB | 310 hp (228 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 3.0 TFSI (EA837) CREC | 333 hp (245 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 3.0 V6 TFSI (EA839) CAKA | 333 hp (245 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 3.0 V6 TFSI (EA839) CCBA | 333 hp (245 kW)
- Videos Videos
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
High-pressure fuel fuel pump for 3.0L TFSI engines
We have modified the original fuel pump to achieve higher fuel pressure and a higher flow rate for your 3.0L TFSI engine. Our upgrade high-pressure pump delivers a full 50% more output than the standard pump!
Suitable for all 3.0 TFSI engines, such as those in the Audi S4 and Audi S5.
Features of the BAR-TEK ® high-pressure pump :
The software must be adjusted after conversion.
Important : After installation, the vehicle must NOT be started immediately ! Switch on the ignition and wait a moment until the pre-feed pump has delivered the fuel supply to the high-pressure pump. Only then may the engine be started. Otherwise, there is a risk of immediate failure of the new pump!
Average rating of 0 out of 5 stars
Login
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
High-pressure fuel fuel pump for 3.0L TFSI engines
We have modified the original fuel pump to achieve higher fuel pressure and a higher flow rate for your 3.0L TFSI engine. Our upgrade high-pressure pump delivers a full 50% more output than the standard pump!
Suitable for all 3.0 TFSI engines, such as those in the Audi S4 and Audi S5.
Features of the BAR-TEK ® high-pressure pump :
- Increases fuel pressure thanks to
- a
- larger piston
- diameter Standard piston: 10mm, Upgrade piston diameter: 11.5 mm
- Less wear and friction thanks to DLC coating
- 50% more power than the standard pump
- A must-have for tuned TFSI engines
- Tested up to 8500 RPM
- Plug & Play installation
The software must be adjusted after conversion.
Important : After installation, the vehicle must NOT be started immediately ! Switch on the ignition and wait a moment until the pre-feed pump has delivered the fuel supply to the high-pressure pump. Only then may the engine be started. Otherwise, there is a risk of immediate failure of the new pump!
- Audi A4 / S4 / RS4 B8 (Type 8K) | Year built 2007-2015 3.0 TFSI (EA837) CAKA | 333 hp (245 kW)
- Audi A4 / S4 / RS4 B8 (Type 8K) | Year built 2007-2015 3.0 TFSI (EA837) CCBA | 333 hp (245 kW)
- Audi A4 / S4 / RS4 B8 (Type 8K) | Year built 2007-2015 3.0 TFSI (EA837) CMUA | 272 hp (200 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CAKA | 333 hp (245 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CCBA | 333 hp (245 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CMUA | 272 hp (200 kW)
- Audi A5 / S5 / RS5 8T | Year built 2007-2016 3.0 TFSI (EA837) CREC | 333 hp (245 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 3.0 TFSI (EA837) CGWD | 310 hp (228 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 3.0 TFSI (EA837) CGXB | 310 hp (228 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 3.0 TFSI (EA837) CREC | 333 hp (245 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 3.0 TFSI (EA837) CGWD | 310 hp (228 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 3.0 TFSI (EA837) CGXB | 310 hp (228 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 3.0 TFSI (EA837) CREC | 333 hp (245 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 3.0 V6 TFSI (EA839) CAKA | 333 hp (245 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 3.0 V6 TFSI (EA839) CCBA | 333 hp (245 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany