Chip und Motortuning
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
The warranty takes effect from the date of purchase.
The warranty is void in the event of improper use and, in particular, in the following cases:
Our racing engines are excluded from the three-year warranty.
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
The warranty takes effect from the date of purchase.
The warranty is void in the event of improper use and, in particular, in the following cases:
Our racing engines are excluded from the three-year warranty.
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
Here you can download the warranty terms and conditions.
With a power increase of over 650 Nm, your standard clutch can no longer keep up. This is why the speed is often limited in practice, which we can't want in tuning! Here you need a reinforced upgrade-DSG clutch that can transmit the power to the full extent and does not slip halfway through. Our upgrade-DSG clutch kit including clutch housing is perfect for all vehicles with 7-speed DQ500 DSG gearboxes, such as Audi RS3 and TT RS. It achieves a perfect power transmission of over 1,000 Nm!
While the original clutch on engines with DSG-DQ500 gearboxes often starts to slip at 650 Nm torque, you can change gears quickly and without loss of traction with our kit - and with full power up to over 1,000 Nm! So you don't have to limit the torque, as is often done , but benefit from the full scope of your performance increase. Our reinforced clutches are already tried and tested in motorsport, so you don't have to worry about the high wear and tear of the standard clutch .
Our clutch kit is completely calibrated and ready to install, including a customised clutch housing. You don't get a replacement, but a new part: The clutch is simply swapped for the original. The only thing left to do is to optimise the DSG software at . Also get our DSG- oil cooler, to extend the service life.
Features of our reinforced clutch:
Our clutch kit includes:
The clutch is used successfully in the TT RS Cup vehicles and is fully race-tested.
We recommend in any case a DSG oil cooler to installto guarantee a long service life of the clutch.
- Made with ❤ -
Average rating of 0 out of 5 stars
Chip und Motortuning
2.5L Motor-Tuning-Guides
Up to 1.000 hp with your RS in 5 tuning stages!
2.5L Motor-Tuning-Guides
The sure-fire way to a tremendous 650 hp
Accesories
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
With a power increase of over 650 Nm, your standard clutch can no longer keep up. This is why the speed is often limited in practice, which we can't want in tuning! Here you need a reinforced upgrade-DSG clutch that can transmit the power to the full extent and does not slip halfway through. Our upgrade-DSG clutch kit including clutch housing is perfect for all vehicles with 7-speed DQ500 DSG gearboxes, such as Audi RS3 and TT RS. It achieves a perfect power transmission of over 1,000 Nm!
While the original clutch on engines with DSG-DQ500 gearboxes often starts to slip at 650 Nm torque, you can change gears quickly and without loss of traction with our kit - and with full power up to over 1,000 Nm! So you don't have to limit the torque, as is often done , but benefit from the full scope of your performance increase. Our reinforced clutches are already tried and tested in motorsport, so you don't have to worry about the high wear and tear of the standard clutch .
Our clutch kit is completely calibrated and ready to install, including a customised clutch housing. You don't get a replacement, but a new part: The clutch is simply swapped for the original. The only thing left to do is to optimise the DSG software at . Also get our DSG- oil cooler, to extend the service life.
Features of our reinforced clutch:
Our clutch kit includes:
The clutch is used successfully in the TT RS Cup vehicles and is fully race-tested.
We recommend in any case a DSG oil cooler to installto guarantee a long service life of the clutch.
- Made with ❤ -
Average rating of 0 out of 5 stars
Chip und Motortuning
2.5L Motor-Tuning-Guides
Up to 1.000 hp with your RS in 5 tuning stages!
2.5L Motor-Tuning-Guides
The sure-fire way to a tremendous 650 hp
Accesories
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany