Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Upgrade Oil filter housing BAR-TEK® made of aluminium with cooling fins for improved cooling of the transmission oil.
The upgrade oil filter housing for the DSG DQ500 transmission replaces the original plastic housing. The aluminium and cooling fins significantly improve heat dissipation and cool the transmission oil. This is particularly important with a tuned DSG gearbox, as these are very susceptible to high temperatures and the gearbox can go into emergency mode if the oil overheats. In addition, the housing is much more stable than the standard part. Torn housings and leaks are therefore a thing of the past.
A highlight is our matching oil temperature gauge as a ready-to-use kit. With our oil temperature gauge, the oil temperature of the DSG transmission can be displayed digitally. This can be ordered as a kit version.
Oil filter housing features:
Made from high-quality aluminium
better cooling of the transmission oil
significantly more stable than standard
Plug&Play fit
incl. Viton O-ring
Features oil temperature display:
high-quality digital display
Display 56.4 x 27 x 11mm
Flexible mounting due to small display
Measuring range 0-120°C
Flashing warning at over 120°C
Display colour selectable in red or blue
including wiring harness and sensor
Plug&Play compatible with our oil filter housing
Suitable for all DSG DQ500 transmissions such as e. g. in the 2.5L TFSI engine and many others.
Upgrade Oil filter housing BAR-TEK® made of aluminium with cooling fins for improved cooling of the transmission oil.
The upgrade oil filter housing for the DSG DQ500 transmission replaces the original plastic housing. The aluminium and cooling fins significantly improve heat dissipation and cool the transmission oil. This is particularly important with a tuned DSG gearbox, as these are very susceptible to high temperatures and the gearbox can go into emergency mode if the oil overheats. In addition, the housing is much more stable than the standard part. Torn housings and leaks are therefore a thing of the past.
A highlight is our matching oil temperature gauge as a ready-to-use kit. With our oil temperature gauge, the oil temperature of the DSG transmission can be displayed digitally. This can be ordered as a kit version.
Oil filter housing features:
Made from high-quality aluminium
better cooling of the transmission oil
significantly more stable than standard
Plug&Play fit
incl. Viton O-ring
Features oil temperature display:
high-quality digital display
Display 56.4 x 27 x 11mm
Flexible mounting due to small display
Measuring range 0-120°C
Flashing warning at over 120°C
Display colour selectable in red or blue
including wiring harness and sensor
Plug&Play compatible with our oil filter housing
Suitable for all DSG DQ500 transmissions such as e. g. in the 2.5L TFSI engine and many others.
3 Years Warranty
