380cc injector BOSCH 100% matched

Injectors from Bosch 380 ccm flow at 3 bar.

When using an upgrade turbocharger these injectors are essential. This means no change of fuel pressure is necessary! The chip must of course be adjusted. It is also recommended to install an additional fuel pump such as our Pierburg pump.

Technical data:

• 380 ccm/min at 3 bar
• 14 Ohm (high impedance)
• 4-hole with EV6 design
• Length from O-ring to O-ring start 60 mm

Suitable for many models such as e. g. VR6, G60, 16v or 1.8T Audi S2 or RS2

PLUS: Injectors are pre-tested and matched to each other by us! This gives you perfectly matched injectors for your engine! Price per piece!

These injectors can also be used instead of the grey Rally Golf injectors on the G60. If necessary, some reworking of the plastic on the injectors is required.

Even new injectors have a certain variation in injected quantity!
The manufacturers specify a tolerance of up to 8% as "normal". In the worst case this can lead to incorrect injection quantities per cylinder. As a result, the cylinders receive different fuel quantities injected and the engine does not run smoothly, or damage to pistons or valves may occur! Thanks to our ASNU injector test bench, we can also test new injectors and thus optimally match them to each other. Here you can go directly to our injector test bench.