More Tuning Guides
Tuning-Guide for 1.8 TSI EA888 engines
Tuning guide for 1.8 TSI EA888 engines with standard 170 PS / 250 Nm.
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
The warranty takes effect from the date of purchase.
The warranty is void in the event of improper use and, in particular, in the following cases:
Our racing engines are excluded from the three-year warranty.
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
The warranty takes effect from the date of purchase.
The warranty is void in the event of improper use and, in particular, in the following cases:
Our racing engines are excluded from the three-year warranty.
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
Here you can download the warranty terms and conditions.
Due to the ø 76 mm downpipe completely without catalyst, the back pressure is significantly reduced and the turbo is relieved. This brings more power and less exhaust gas temperature.
The downpipe is made of stainless steel. The flanges are laser cut from steel so that they do not warp. The flange surfaces are planned in the connection and prevent thus leakages.
We use here an interlock flex pipe, which is particularly flexible and also very stable. Two lambda probe connections in M18x1,5 mm are welded in. The connecting pipe to the exhaust is reduced to 60 mm and can therefore be easily driven with the original exhaust system.
Possibly the after cat probe must be programmed out in the software. Only suitable for vehicles with front wheel drive.
Average rating of 0 out of 5 stars
Tuning guide for 1.8 TSI EA888 engines with standard 170 PS / 250 Nm.
Chip und Motortuning
Car-Guides
Engine tuning guide for VW Golf VII GTI Clubsport
Chip und Motortuning
Der Guide für Golf 7 R Motoren mit serienmäßig 300 PS
The guide for Golf 7 R engines from 265 hp as standard, for example
Even more power for your VW Golf GTI and others!
Accessories
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Due to the ø 76 mm downpipe completely without catalyst, the back pressure is significantly reduced and the turbo is relieved. This brings more power and less exhaust gas temperature.
The downpipe is made of stainless steel. The flanges are laser cut from steel so that they do not warp. The flange surfaces are planned in the connection and prevent thus leakages.
We use here an interlock flex pipe, which is particularly flexible and also very stable. Two lambda probe connections in M18x1,5 mm are welded in. The connecting pipe to the exhaust is reduced to 60 mm and can therefore be easily driven with the original exhaust system.
Possibly the after cat probe must be programmed out in the software. Only suitable for vehicles with front wheel drive.
Average rating of 0 out of 5 stars
Tuning guide for 1.8 TSI EA888 engines with standard 170 PS / 250 Nm.
Chip und Motortuning
Car-Guides
Engine tuning guide for VW Golf VII GTI Clubsport
Chip und Motortuning
Der Guide für Golf 7 R Motoren mit serienmäßig 300 PS
The guide for Golf 7 R engines from 265 hp as standard, for example
Even more power for your VW Golf GTI and others!
Accessories
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany