Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
BAR-TEK Bronze Sliders for Gear Shift Fork for 02M and 02Q Gearbox.
These sliders replace the oem plasic sliders found on the 02M and 02Q Shift Forks. The oem plastic sliders can quickly wear and remove themselves from the fork. Once they have been removed there will be an excessive disengaging and damage to the synchros and gears.
Our Bronze upgrade sliders will eliminate this problem.
Features:
The strength of bronze instead of the vulnerability of plastic
replace the oem sliders plug&play
complete pair (2pcs)
Fits for:
02M & 02Q gearboxes with steel forks such as our upgrade shift forks
There are various combinations of steel forks found in gearboxes:
3 x Steel Fork + 1 x Bronze Fork = you need 3 Pairs
2 x Steel Fork + 2 x Bronze Fork = you need 2 Pairs
1 x Steel Fork + 3 x Bronze Fork = you need 1 Pair
Not fits for brass shift fork!
Tip: Before sliding on the sliders, polish the tips of the shift fork!
Do you want to install this part from us? Contact us!
Do you have questions about the product?Just start the chat, we will help you with your product selection.
BAR-TEK Bronze Sliders for Gear Shift Fork for 02M and 02Q Gearbox.
These sliders replace the oem plasic sliders found on the 02M and 02Q Shift Forks. The oem plastic sliders can quickly wear and remove themselves from the fork. Once they have been removed there will be an excessive disengaging and damage to the synchros and gears.
Our Bronze upgrade sliders will eliminate this problem.
Features:
The strength of bronze instead of the vulnerability of plastic
replace the oem sliders plug&play
complete pair (2pcs)
Fits for:
02M & 02Q gearboxes with steel forks such as our upgrade shift forks
There are various combinations of steel forks found in gearboxes:
3 x Steel Fork + 1 x Bronze Fork = you need 3 Pairs
2 x Steel Fork + 2 x Bronze Fork = you need 2 Pairs
1 x Steel Fork + 3 x Bronze Fork = you need 1 Pair
Not fits for brass shift fork!
Tip: Before sliding on the sliders, polish the tips of the shift fork!
Do you want to install this part from us? Contact us!
Do you have questions about the product?Just start the chat, we will help you with your product selection.