Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
VW VR6 & R32 manual race chain tensioner BAR-TEK®
- Manually adjustable
- Super processing
- Top quality
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- made from high-quality stainless steel
- ARP Lock nut
- Viton sealing ring
- Manually adjustable chain tension
- Always perfect timing, therefore 100% performance & safety
- Replaces the vulnerable OEM hydraulic chain tensioner
- VW VR6 12V engines
- VW VR6 24V engines
- Fits for Fits for
- Volkswagen Golf III (Type 1H) | Year built 1991-1997 2.8 VR6 AAA | 174 hp (128 kW)
- Volkswagen Golf III (Type 1H) | Year built 1991-1997 2.9 VR6 ABV | 190 hp (140 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 2.8 VR6 AQP | 204 hp (150 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 2.8 VR6 AUE | 204 hp (150 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 2.8 VR6 BDE | 204 hp (150 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 3.2 VR6 (EA390) BFH | 241 hp
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 3.2 VR6 (EA390) BML | 241 hp (177 kW)
- Volkswagen Passat B3 (Type 31/35i) | Year built 1988-1993 2.8 VR6 AAA | 174 hp (128 kW)
- Volkswagen Sharan I (Type 7M8) | Year built 1995-2010 2.8 VR6 AAA | 174 hp (128 kW)
- Volkswagen Sharan I (Type 7M8) | Year built 1995-2010 2.8 VR6 AMY | 174 hp (128 kW)
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 3.2 VR6 (EA390) BDB | 250 hp (184 kW)
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 3.2 VR6 (EA390) BMJ | 250 hp (184 kW)
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 3.2 VR6 (EA390) BUB | 250 hp (184 kW)
- Audi TT / TTS / TT RS 8J | Year built 2006-2014 3.2 VR6 (EA390) BUB | 250 hp (184 kW)
- Audi TT / TTS / TT RS 8N | Year built 1998-2006 3.2 VR6 (EA390) BHE | 250 hp (184 kW)
- Seat Leon I (Type 1M1) | Year built 1999-2006 2.8 FSI V6 24v AUE | 204 hp (150 kW)
- Seat Leon I (Type 1M1) | Year built 1999-2006 2.8 FSI V6 24v BDE | 204 hp (150 kW)
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
Manual race chain tensioner for all VW 2.8-2.9L VR6 engines.
Our adjustable chain tensioner replaces the vulnerable original hydraulic chain tensioner. The original chain tensioner tends to tighten the chain too much at higher engine speeds, which means that the timing is no longer 100% correct. This leads to a loss of power and increased wear. With our manual chain tensioner, you can precisely adjust the tension of the timing chain.
Features:
Advantages:
Suitable for:
A must-have for performance-enhanced engines, such as e. g. VR6 Turbo conversions.
Instructions:
Remove the ARP 12-point lock nut. Turn the piston fully into the extended position.
Insert the housing and piston into the timing cover and tighten.
Ensure that the aluminium sealing washer is properly seated against the timing cover.
Screws Screw in the piston hand-tight without tightening the ARP lock nut.
Then turn the motor by hand in the forward direction while continuing to screw in the piston hand-tight.
Hold the housing in position with the square end.
Finally, tighten the ARP lock nut to 25 Nm without tightening the tensioner further in its position.
Average rating of 0 out of 5 stars
Login
Accesories
Average rating of 0 out of 5 stars
Delivery time 1 - 3 days
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Manual race chain tensioner for all VW 2.8-2.9L VR6 engines.
Our adjustable chain tensioner replaces the vulnerable original hydraulic chain tensioner. The original chain tensioner tends to tighten the chain too much at higher engine speeds, which means that the timing is no longer 100% correct. This leads to a loss of power and increased wear. With our manual chain tensioner, you can precisely adjust the tension of the timing chain.
Features:
- made from high-quality stainless steel
- ARP Lock nut
- Viton sealing ring
Advantages:
- Manually adjustable chain tension
- Always perfect timing, therefore 100% performance & safety
- Replaces the vulnerable OEM hydraulic chain tensioner
Suitable for:
- VW VR6 12V engines
- VW VR6 24V engines
A must-have for performance-enhanced engines, such as e. g. VR6 Turbo conversions.
Instructions:
Remove the ARP 12-point lock nut. Turn the piston fully into the extended position.
Insert the housing and piston into the timing cover and tighten.
Ensure that the aluminium sealing washer is properly seated against the timing cover.
Screws Screw in the piston hand-tight without tightening the ARP lock nut.
Then turn the motor by hand in the forward direction while continuing to screw in the piston hand-tight.
Hold the housing in position with the square end.
Finally, tighten the ARP lock nut to 25 Nm without tightening the tensioner further in its position.
- Volkswagen Golf III (Type 1H) | Year built 1991-1997 2.8 VR6 AAA | 174 hp (128 kW)
- Volkswagen Golf III (Type 1H) | Year built 1991-1997 2.9 VR6 ABV | 190 hp (140 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 2.8 VR6 AQP | 204 hp (150 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 2.8 VR6 AUE | 204 hp (150 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 2.8 VR6 BDE | 204 hp (150 kW)
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 3.2 VR6 (EA390) BFH | 241 hp
- Volkswagen Golf IV (Type 1J) | Year built 1997-2003 3.2 VR6 (EA390) BML | 241 hp (177 kW)
- Volkswagen Passat B3 (Type 31/35i) | Year built 1988-1993 2.8 VR6 AAA | 174 hp (128 kW)
- Volkswagen Sharan I (Type 7M8) | Year built 1995-2010 2.8 VR6 AAA | 174 hp (128 kW)
- Volkswagen Sharan I (Type 7M8) | Year built 1995-2010 2.8 VR6 AMY | 174 hp (128 kW)
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 3.2 VR6 (EA390) BDB | 250 hp (184 kW)
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 3.2 VR6 (EA390) BMJ | 250 hp (184 kW)
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 3.2 VR6 (EA390) BUB | 250 hp (184 kW)
- Audi TT / TTS / TT RS 8J | Year built 2006-2014 3.2 VR6 (EA390) BUB | 250 hp (184 kW)
- Audi TT / TTS / TT RS 8N | Year built 1998-2006 3.2 VR6 (EA390) BHE | 250 hp (184 kW)
- Seat Leon I (Type 1M1) | Year built 1999-2006 2.8 FSI V6 24v AUE | 204 hp (150 kW)
- Seat Leon I (Type 1M1) | Year built 1999-2006 2.8 FSI V6 24v BDE | 204 hp (150 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accesories
Average rating of 0 out of 5 stars
Delivery time 1 - 3 days
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany