Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
Gasket scraper Gasket remover Flat scraper BAR-TEK®
- Stainless steel blade
- Rubberized handle
- Top price
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Stainless steel blade
- Rubberized handle for maximum grip
- Top price - performance
- Blade: W 30 mm x L 100 mm
- Handle: 115 mm
- Total: 220 mm
- Fits for Fits for
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accessories Accessories
- Recommendations
- GSPR GSPR
Scraper for removing sealing residues
High-quality manufactured scraper for removing seal residues, adhesive residues and much more.
The scraper is made of high quality stainless steel to ensure that a long life is guaranteed.
Application:
The scraper is placed so that the area to be cleaned is not damaged, then scrape several times with light pressure over the area to remove coarse residues.
For very fine seal residues, we recommend our abrasive fleece
(under "Suitable accessories").
Features & Specifications:
Dimensions:
Average rating of 0 out of 5 stars
Login
Accessories
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Scraper for removing sealing residues
High-quality manufactured scraper for removing seal residues, adhesive residues and much more.
The scraper is made of high quality stainless steel to ensure that a long life is guaranteed.
Application:
The scraper is placed so that the area to be cleaned is not damaged, then scrape several times with light pressure over the area to remove coarse residues.
For very fine seal residues, we recommend our abrasive fleece
(under "Suitable accessories").
Features & Specifications:
- Stainless steel blade
- Rubberized handle for maximum grip
- Top price - performance
Dimensions:
- Blade: W 30 mm x L 100 mm
- Handle: 115 mm
- Total: 220 mm
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accessories
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
