Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Completely anodized aluminum
- CNC machined from solid billet
- Dimensions: 140 mm x 80 mm (400 ml volume)
- 1/2" NPT thread
- No contamination of intake valves and intake tract
- No more idle hunting caused by dirty throttle bodies
- The collected oil is filtered and can be drained
- Drain screw in the bottom
- Black anodized, sleek finish
- with dipstick for easy level reading
- Fits for Fits for
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- accesories accesories
- Recommendations
- GSPR GSPR
Keep your engine clean. Especially on the inside.
Best aluminum oil catchtank on the market from BAR-TEK® Motorsport, universal fit for almost all vehicles
With our catchtank, the oil vapors from the crankcase ventilation are no longer routed back into the intake tract. The filtered oil is collected in the tank.
This drastically reduces intake valve coking, especially on direct-injection engines.
Available as an open or closed catchtank.
The advantages of this system are:
With our different brackets you have maximum freedom for installation.
(Picture shows fittings and bracket. The catchtank is supplied only with two 90° 1/2" NPT to Dash 10 fittings. For the open catchtank you should also order the breather filter. You can find it under accesories)
Note on use in cold climates:
The catchtank is designed only for warm climates.
In winter, at temperatures below 0°C, the condensation that forms in the system can freeze. This can cause increased crankcase pressure, which may lead to engine damage. We recommend checking the catchtank system more frequently in winter or removing it completely during the cold season.
Average rating of 5 out of 5 stars
Login
2 reviews
21 July 2025 10:37
Review with rating of 5 out of 5 stars
Top Produkt
Habe den Catchtank ohne halterung bestellt und mir fix einen Halter selber gebaut für meinen M42B18 Motor. Der Catchtank sieht sehr hochwertig aus und schmückt nun meinen Motorraum.
3 February 2022 00:00
Review with rating of 5 out of 5 stars
Top Qualität, super Verarbeitung, tolle
Top Qualität, super Verarbeitung, tolle Optik ... nur eine kurze Anleitung (=> Offnen, Ölablassen, Drehmomente der Verschaubung, ...) wäre noch schön.
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Keep your engine clean. Especially on the inside.
Best aluminum oil catchtank on the market from BAR-TEK® Motorsport, universal fit for almost all vehicles
With our catchtank, the oil vapors from the crankcase ventilation are no longer routed back into the intake tract. The filtered oil is collected in the tank.
This drastically reduces intake valve coking, especially on direct-injection engines.
Available as an open or closed catchtank.
The advantages of this system are:
- Completely anodized aluminum
- CNC machined from solid billet
- Dimensions: 140 mm x 80 mm (400 ml volume)
- 1/2" NPT thread
- No contamination of intake valves and intake tract
- No more idle hunting caused by dirty throttle bodies
- The collected oil is filtered and can be drained
- Drain screw in the bottom
- Black anodized, sleek finish
- with dipstick for easy level reading
With our different brackets you have maximum freedom for installation.
(Picture shows fittings and bracket. The catchtank is supplied only with two 90° 1/2" NPT to Dash 10 fittings. For the open catchtank you should also order the breather filter. You can find it under accesories)
Note on use in cold climates:
The catchtank is designed only for warm climates.
In winter, at temperatures below 0°C, the condensation that forms in the system can freeze. This can cause increased crankcase pressure, which may lead to engine damage. We recommend checking the catchtank system more frequently in winter or removing it completely during the cold season.
Average rating of 5 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
2 reviews
21 July 2025 10:37
Review with rating of 5 out of 5 stars
Top Produkt
Habe den Catchtank ohne halterung bestellt und mir fix einen Halter selber gebaut für meinen M42B18 Motor. Der Catchtank sieht sehr hochwertig aus und schmückt nun meinen Motorraum.
3 February 2022 00:00
Review with rating of 5 out of 5 stars
Top Qualität, super Verarbeitung, tolle
Top Qualität, super Verarbeitung, tolle Optik ... nur eine kurze Anleitung (=> Offnen, Ölablassen, Drehmomente der Verschaubung, ...) wäre noch schön.
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany