Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
G60 cylinder head RACE completely CNC machined BAR-TEK®
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Cylinder head dismantling and cleaning
- Professional cleaning in an ultrasonic bath
- CNC Machining of the intake and exhaust ducts
- Replacing the valve guides to conical version
- Recutting the seat rings
- Fitting new valve stem seals
- Schrick valve springs
- Schrick hydraulic tappet
- Schrick titanium spring retainer
- Schrick valve keys
- Schrick or Supertech valves
- Fits for Fits for
- Volkswagen Golf II (Type 19E/1G1) | Year built 1983-1992 1.8 G60 PG | 160 hp (118 kW)
- Volkswagen Passat B3 (Type 31/35i) | Year built 1988-1993 1.8 G60 PG | 160 hp (118 kW)
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accessories Accessories
- Recommendations
- GSPR GSPR
Completely CNC machined 8V cylinder head for all G60 engines in exchange.
Scope of services:
We offer two different performance levels especially for the G60 cylinder head:
Version 1 for 8mm valves in 40/33
Version 2 for 7mm valves in 40/34mm.
All inlet and outlet ducts have been manufactured with elaborate CNC machining. This has given the cylinder head a perfect and absolutely channel-identical finish. Each cylinder therefore has a 100% identical filling.
Our G60 cylinder head fits all Golf engines built between 89 and 92.
We also recommend the following accesories:
The G60 cylinder head must be sent to us in advance.
Depending on the complexity and capacity utilisation, we need approx. 2 weeks for completion.
Average rating of 0 out of 5 stars
Login
Accessories
Average rating of 0 out of 5 stars
Delivery time 1 - 3 days
Average rating of 0 out of 5 stars
Delivery 5 to 8 days
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Completely CNC machined 8V cylinder head for all G60 engines in exchange.
Scope of services:
- Cylinder head dismantling and cleaning
- Professional cleaning in an ultrasonic bath
- CNC Machining of the intake and exhaust ducts
- Replacing the valve guides to conical version
- Recutting the seat rings
- Fitting new valve stem seals
We offer two different performance levels especially for the G60 cylinder head:
Version 1 for 8mm valves in 40/33
Version 2 for 7mm valves in 40/34mm.
All inlet and outlet ducts have been manufactured with elaborate CNC machining. This has given the cylinder head a perfect and absolutely channel-identical finish. Each cylinder therefore has a 100% identical filling.
Our G60 cylinder head fits all Golf engines built between 89 and 92.
We also recommend the following accesories:
- Schrick valve springs
- Schrick hydraulic tappet
- Schrick titanium spring retainer
- Schrick valve keys
- Schrick or Supertech valves
The G60 cylinder head must be sent to us in advance.
Depending on the complexity and capacity utilisation, we need approx. 2 weeks for completion.
- Volkswagen Golf II (Type 19E/1G1) | Year built 1983-1992 1.8 G60 PG | 160 hp (118 kW)
- Volkswagen Passat B3 (Type 31/35i) | Year built 1988-1993 1.8 G60 PG | 160 hp (118 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accessories
Average rating of 0 out of 5 stars
Delivery time 1 - 3 days
Average rating of 0 out of 5 stars
Delivery 5 to 8 days
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany