Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Machined from solid (billet)
- Black anodized for better corrosion protection
- 80° thermostat
- Fastening with 12 mm hex socket (innovation)
- With 1/8 NPT connection for temperature or oil pressure gauge (see accesories)
- Overall height: 32 mm
- Dash 8 connections (internal thread in the flange M18x1.5)
- Fits for Fits for
- Videos Videos
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- accesories accesories
- Recommendations
- GSPR GSPR
Best oil cooler flange with thermostat developed by BAR-TEK®. The adapter is a must for optimal oil cooling on performance-enhanced vehicles.
Features:
Very easy installation thanks to the specially manufactured screw with 12 mm hex socket. (significantly easier than 26 mm socket with other manufacturers)
(Delivery without the illustrated tool, oil cooler screw and temperature sensor)
For more information click HERE
NPT threads are theoretically self-sealing. The sealing effect is ensured by the increasing diameter and thus by the thread flanks. Depending on manufacturing tolerances, material and quality of the existing thread, however, a 100 percent seal cannot always be achieved in practice. We therefore always recommend using a chemical thread sealant even with NPT threads.
Average rating of 0 out of 5 stars
Login
10 reviews
28 February 2026 06:43
Review with rating of 5 out of 5 stars
Hochwertig
Sollte jedoch besser darauf hingewiesen werden, dass die Schraube nicht dabei ist.
19 February 2026 08:25
Review with rating of 5 out of 5 stars
Sehr gute Qualität
Sehr gute Qualität
14 February 2026 13:03
Review with rating of 5 out of 5 stars
no comment
no comment
6 December 2025 13:49
Review with rating of 5 out of 5 stars
Hallo Bar-tek Team, gute Fertigung di
Hallo Bar-tek Team, gute Fertigung die techn. auch sehr gut durchdacht ist. Für höchste Ansprüche gefertigt.
13 May 2025 09:16
Review with rating of 5 out of 5 stars
no comment
no comment
20 March 2025 09:09
Review with rating of 5 out of 5 stars
no comment
no comment
26 November 2024 16:21
Review with rating of 5 out of 5 stars
no comment
no comment
11 September 2024 07:20
Review with rating of 5 out of 5 stars
no comment
no comment
8 July 2023 16:19
Review with rating of 5 out of 5 stars
Sehr gut ?? weiter so ??????????????????
Sehr gut ?? weiter so ????????????????????????
9 May 2022 00:00
Review with rating of 5 out of 5 stars
Sehr gute Qualität
Sehr gute Qualität
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Best oil cooler flange with thermostat developed by BAR-TEK®. The adapter is a must for optimal oil cooling on performance-enhanced vehicles.
Features:
- Machined from solid (billet)
- Black anodized for better corrosion protection
- 80° thermostat
- Fastening with 12 mm hex socket (innovation)
- With 1/8 NPT connection for temperature or oil pressure gauge (see accesories)
- Overall height: 32 mm
- Dash 8 connections (internal thread in the flange M18x1.5)
Very easy installation thanks to the specially manufactured screw with 12 mm hex socket. (significantly easier than 26 mm socket with other manufacturers)
(Delivery without the illustrated tool, oil cooler screw and temperature sensor)
For more information click HERE
NPT threads are theoretically self-sealing. The sealing effect is ensured by the increasing diameter and thus by the thread flanks. Depending on manufacturing tolerances, material and quality of the existing thread, however, a 100 percent seal cannot always be achieved in practice. We therefore always recommend using a chemical thread sealant even with NPT threads.
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
10 reviews
28 February 2026 06:43
Review with rating of 5 out of 5 stars
Hochwertig
Sollte jedoch besser darauf hingewiesen werden, dass die Schraube nicht dabei ist.
19 February 2026 08:25
Review with rating of 5 out of 5 stars
Sehr gute Qualität
Sehr gute Qualität
14 February 2026 13:03
Review with rating of 5 out of 5 stars
no comment
no comment
6 December 2025 13:49
Review with rating of 5 out of 5 stars
Hallo Bar-tek Team, gute Fertigung di
Hallo Bar-tek Team, gute Fertigung die techn. auch sehr gut durchdacht ist. Für höchste Ansprüche gefertigt.
13 May 2025 09:16
Review with rating of 5 out of 5 stars
no comment
no comment
20 March 2025 09:09
Review with rating of 5 out of 5 stars
no comment
no comment
26 November 2024 16:21
Review with rating of 5 out of 5 stars
no comment
no comment
11 September 2024 07:20
Review with rating of 5 out of 5 stars
no comment
no comment
8 July 2023 16:19
Review with rating of 5 out of 5 stars
Sehr gut ?? weiter so ??????????????????
Sehr gut ?? weiter so ????????????????????????
9 May 2022 00:00
Review with rating of 5 out of 5 stars
Sehr gute Qualität
Sehr gute Qualität
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany