BAR-TEK® Charge and Boost Pipe Set fits BMW S55B30 F8X M2/M3/M4
- no risk of bursting
- Largest possible pipe routing
- Plug and Play
- faster response of the turbos
- Description
- Videos
- Reviews (0)
- Blog Posts
- Accessory Items
- Kunden kauften auch
The aluminum charge air pipes replace the OEM plastic pipes, which tend to burst. This defect can in the worst case lead to engine damage due to aspirated fragments.
The charge pipe made of aluminum has an increased diameter compared to the original. This reduces air turbulence and at the same time increases the air flow. This leads to a faster response of the turbocharger and a higher maximum possible power.
The engine software does not have to be retuned in this case. Even at very high boost pressures, there is no longer any risk of bursting. In addition, the kit provides a good basis for retrofitting a water-methanol injection system. A connection for one is already prepared.
The installation is relatively simple since this Charge Pipe Plug'n'play is exchanged against the series part. This Charge Pipe Kit replaces the BMW original parts with the part numbers: 11617846245, 11617846246, 11617846248
Accessory Items
Delivery time 8 - 12 days
Delivery time 8 - 12 days
Can be delivered in 5 to 8 days
Can be delivered in 5 to 8 days
Content: 10 Liter (€48.40* / 1 Liter)
Ready to ship immediately!
Can be delivered in 5 to 8 days
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Delivery time 18 - 24 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Ready to ship immediately!
Kunden kauften auch
Ready to ship immediately!
Ready to ship immediately!
Can be delivered in 5 to 8 days
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
The aluminum charge air pipes replace the OEM plastic pipes, which tend to burst. This defect can in the worst case lead to engine damage due to aspirated fragments.
The charge pipe made of aluminum has an increased diameter compared to the original. This reduces air turbulence and at the same time increases the air flow. This leads to a faster response of the turbocharger and a higher maximum possible power.
The engine software does not have to be retuned in this case. Even at very high boost pressures, there is no longer any risk of bursting. In addition, the kit provides a good basis for retrofitting a water-methanol injection system. A connection for one is already prepared.
The installation is relatively simple since this Charge Pipe Plug'n'play is exchanged against the series part. This Charge Pipe Kit replaces the BMW original parts with the part numbers: 11617846245, 11617846246, 11617846248
Accessory Items
Delivery time 8 - 12 days
Delivery time 8 - 12 days
Can be delivered in 5 to 8 days
Can be delivered in 5 to 8 days
Content: 10 Liter (€48.40* / 1 Liter)
Ready to ship immediately!
Can be delivered in 5 to 8 days
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Delivery time 18 - 24 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days
Ready to ship immediately!
Kunden kauften auch
Ready to ship immediately!
Ready to ship immediately!
Can be delivered in 5 to 8 days
Can be delivered in 5 to 8 days
Ready to ship immediately!
Can be delivered in 5 to 8 days