High Boost with the aluminium boost pipe for Audi
RS3 8V & TTRS 8S
Our boost pipe for
the connection from the turbocharger to the intercooler is designed for maximum boost!
This not only gives your engine plenty of power,
but also significantly increases the durability of the turbocharger and engine.
Thanks to the supplied
silicone hoses, the whole thing can also be installed super easily as plug & play.
In our latest expansion stage with approval and TÜV compatible!
The boost pipe can be installed and registered completely legally in combination (and only in combination) with our 4" or 5" air intake. TÜV certificate included!
Approval and TÜV are issues for everyone in the automotive and tuning sector. And the future does not necessarily look simple. In order to anticipate the whole topic of certificates, ABE's and type approvals, we have gone to the effort of having our parts for the RS3 tested. We are now proud to be able to offer you many of our high performance parts with approval.
Our boost pipe has been specially developed for the aluminium engine block of 2.5 TFSI EA855 evo engines. It is made from cast aluminium and is therefore designed for maximum boost pressure and highest flow rate. We have greatly increased the cross-section compared to the OEM part so that a higher flow rate is achieved. The back pressure is also reduced so that the compressed air can flow evenly and without turbulence. Instead of blowing through a narrow hole, your turbocharger can therefore send plenty of air to the intercooler. This not only increases performance, but also the durability of your turbocharger.
In combination with the
two supplied silicone hoses, the pipe can be installed plug & play from the
original turbo to the intercooler.
Features:
- Boost pipe made from cast aluminium
-
OEM look
-
Enlarged
cross-section
- ID inlet: 60 mm / OEM: 48 mm
-
ID outlet: 66 mm / OEM: 60 mm
-
Plug & Play
-
For maximum boost
-
More flow & more power
-
Improved
durability of your turbo
Attention:
In combination with the
two supplied silicone hoses, the pipe can be easily installed plug & play
on the original turbocharger.