Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
The fuel supply is one of the most important aspects of tuning your EA888. Our BAR-TEK ® intank- fuel pump is specially developed for the EA888 2.0L TSI engines and ensures a reliable fuel supply for performance-enhanced vehicles. The upgrade is an indispensable component for tuning projects that focus on maximum performance and safety.
Why a upgrade low pressure pump for the Gen.3?
The EA888 Gen.3 engine has a complex fuel system with low-pressure and high-pressure circuits. The low-pressure pump in the tank supplies the high-pressure pump, which provides the fuel for injection. When increasing performance, it is essential to adapt the low-pressure pump to the increased fuel requirement in order to avoid engine damage due to a lack of fuel. Particularly at full load and high hp outputs, an inadequate fuel supply can lead to engine lean, loss of power or even engine damage.
Features:
For tuning and performance projects with increased fuel requirements
Pump basket for 2 Walbro 450 LPH
Pump holder CNC milled
integrated pressure control valve
Prevents fuel starvation at full load and high engine speeds
Optimum engine performance
Stable fuel supply
tested up to 800 hp
internal high flow petrol filter
Plug and play for Golf 7 and A3
Robust design for long-term use under high loads
Important notes: Many replacement pumps for tuned engines require the original fuel pump bracket to be machined to ensure a correct seating position in the tank. With inferior pumps, fuel starvation can occur when cornering or when the tank level is low, causing the engine to stutter or stall. With our fuel pump, these problems are a thing of the past.
After installation, check the fuel gauge and, if necessary, readjust it with VCDS
.
Do you have questions about the product?Just start the chat, we will help you with your product selection.
The fuel supply is one of the most important aspects of tuning your EA888. Our BAR-TEK ® intank- fuel pump is specially developed for the EA888 2.0L TSI engines and ensures a reliable fuel supply for performance-enhanced vehicles. The upgrade is an indispensable component for tuning projects that focus on maximum performance and safety.
Why a upgrade low pressure pump for the Gen.3?
The EA888 Gen.3 engine has a complex fuel system with low-pressure and high-pressure circuits. The low-pressure pump in the tank supplies the high-pressure pump, which provides the fuel for injection. When increasing performance, it is essential to adapt the low-pressure pump to the increased fuel requirement in order to avoid engine damage due to a lack of fuel. Particularly at full load and high hp outputs, an inadequate fuel supply can lead to engine lean, loss of power or even engine damage.
Features:
For tuning and performance projects with increased fuel requirements
Pump basket for 2 Walbro 450 LPH
Pump holder CNC milled
integrated pressure control valve
Prevents fuel starvation at full load and high engine speeds
Optimum engine performance
Stable fuel supply
tested up to 800 hp
internal high flow petrol filter
Plug and play for Golf 7 and A3
Robust design for long-term use under high loads
Important notes: Many replacement pumps for tuned engines require the original fuel pump bracket to be machined to ensure a correct seating position in the tank. With inferior pumps, fuel starvation can occur when cornering or when the tank level is low, causing the engine to stutter or stall. With our fuel pump, these problems are a thing of the past.
After installation, check the fuel gauge and, if necessary, readjust it with VCDS
.
Do you have questions about the product?Just start the chat, we will help you with your product selection.
3 Years Warranty
