Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
2.5 TFSI EA855 evo Billet fuel rail BAR-TEK®
- higher flow rate
- pressure-resistant Dash connection
- even fuel distribution
- Made from billet aluminium
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Made from aluminium
- Black anodised finish
- Larger than the standard
- AN8 connections
- PCV bracket
- Injector O-rings included
- OEM-Fuel feed block studs included
- No collision with OEM dipstick
- Fits stock and aftermarket intake manifolds
- Fits for Fits for
- Audi A3 / S3 / RS3 8V | Year built 2012-2020 2.5 TFSI (EA855 evo) DAZA | 400 hp (294 kW)
- Audi A3 / S3 / RS3 8V | Year built 2012-2020 2.5 TFSI (EA855 evo) DNWA | 400 hp (294 kW)
- Audi A3 / S3 / RS3 8Y | Year built 2020-> 2.5 TFSI (EA855 evo) DAZA | 400 hp (294 kW)
- Audi A3 / S3 / RS3 8Y | Year built 2020-> 2.5 TFSI (EA855 evo) DNWA | 400 hp (294 kW)
- Audi TT / TTS / TT RS FV/8S | Year built 2014-> 2.5 TFSI (EA855 evo) DAZA | 400 hp (294 kW)
- Audi TT / TTS / TT RS FV/8S | Year built 2014-> 2.5 TFSI (EA855 evo) DNWA | 400 hp (294 kW)
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
BAR-TEK® fuel rail made of billet aluminium for DAZA and DNWA engines.
Our fuel rail offers more flow than the standard fuel rail. Especially for tuned engines we recommend our BAR-TEK® fuel rail made from aluminium.
Thanks to the open pipe design, all cylinders are evenly supplied with fuel. A fuel recirculation system is also supported as an option.
Fits the standard intake manifold and all other intake manifolds, such as e. g. our billet manifold.
Features:
Average rating of 0 out of 5 stars
Login
Accesories
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
BAR-TEK® fuel rail made of billet aluminium for DAZA and DNWA engines.
Our fuel rail offers more flow than the standard fuel rail. Especially for tuned engines we recommend our BAR-TEK® fuel rail made from aluminium.
Thanks to the open pipe design, all cylinders are evenly supplied with fuel. A fuel recirculation system is also supported as an option.
Fits the standard intake manifold and all other intake manifolds, such as e. g. our billet manifold.
Features:
- Made from aluminium
- Black anodised finish
- Larger than the standard
- AN8 connections
- PCV bracket
- Injector O-rings included
- OEM-Fuel feed block studs included
- No collision with OEM dipstick
- Fits stock and aftermarket intake manifolds
- Audi A3 / S3 / RS3 8V | Year built 2012-2020 2.5 TFSI (EA855 evo) DAZA | 400 hp (294 kW)
- Audi A3 / S3 / RS3 8V | Year built 2012-2020 2.5 TFSI (EA855 evo) DNWA | 400 hp (294 kW)
- Audi A3 / S3 / RS3 8Y | Year built 2020-> 2.5 TFSI (EA855 evo) DAZA | 400 hp (294 kW)
- Audi A3 / S3 / RS3 8Y | Year built 2020-> 2.5 TFSI (EA855 evo) DNWA | 400 hp (294 kW)
- Audi TT / TTS / TT RS FV/8S | Year built 2014-> 2.5 TFSI (EA855 evo) DAZA | 400 hp (294 kW)
- Audi TT / TTS / TT RS FV/8S | Year built 2014-> 2.5 TFSI (EA855 evo) DNWA | 400 hp (294 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accesories
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
