1.8T 20V forged pistons & Steel connecting rod High Boost ULTI Kit Wiseco & BAR-TEK®

this kit is made for you if you are really serious about increasing performance. Our ULTIMATE kit contains everything you need to make you and your engine happy: power up to 800 hp with your 1.8T 20V engine!

Perfectly tuned: 1.8T ULTIMATE Kit for up to 800 hp power

Whenever you think you can't go any further, think of this kit. Because here we have once again outdone ourselves. The ULTIMATE Kit is not called that for nothing! It gives you everything you need for the best performance from your 1.8T: a perfectly matched combination of forged pistons, connecting rods, connecting rod bolts, connecting rod bearings, head gasket and stud bolt.

Visually alone, this set can do it all: Our BAR-TEK® X-shaft steel connecting rods. The matching forged pistons from Wiseco is also available. All other parts are also of the highest quality: ARP connecting rod bolts, connecting rod bearings from ACL, MLS head gasket from Cometic and ARP stud bolt for the main bearing race and cylinder head.

That's really all you need. Not only do these components harmonise perfectly with each other, but you also save money as a set compared to buying them individually!

Extreme kit for extreme performance

Of course, our kit is not only an eye-catcher, but is also designed for extreme performance. With this kit, you can achieve up to 800 hp with your 1.8T without any worries! This is because we only pack the best components into our Ultimate Kit and they are optimally matched to each other.

The Wiseco piston in this kit are coated on the shirt for extreme performance and are also quite light. This combination is of course perfect for motorsport. The piston comes with everything you need for installation: bolts, rings and clips.

Our X-shaft steel connecting rods are alsoextremely light and at the same time very stable. Thanks to their surface, they can easily withstand the high pressure loads. They are milled from solid material and have an additional hole for better piston pin lubrication (rifle drilled). They also come with everything you need for assembly: the matching ARP2000 expansion bolts and assembly paste.

These two parts are the stars of the kit and are rounded off by high-performance bolts, racing bearings and the like. As I said, more is simply not possible!

Features of the high performance piston:

• Extremely light thanks to special alloy
• Reinforced for maximum performance
• Also for 81 mm standard bore
• 20 mm piston pin
• Installation and bore dimensions enclosed

Features of the X-shaft conrods:

• high-strength milled from solid material
• suitable for extreme power increases from 800 hp
• extremely light and very stable
• Magnaflux inspected
• 4 pieces per set
• Dimensions: 144 x 21 mm
• Weight per conrods with screws only approx. 600 grams
• With oil riser bore for piston pin lubrication (rifle drilled)
• precisely angled and tested in-house
• WITH ARP 2000 expansion bolts 3/8"

Features of the ACL connecting rod bearings:

• Racing bearings, ACL Race
• extra coated
• extra bore for the piston pin

Features of the APR stud bolt for the block and head:

• A MUST for all engines that run with increased boost pressure!
• The most important pins from the world market leader ARP.
• The stud bolt are made from 8740 chromoly steel and have rounded threads.
• Up to 40% stronger than standard bolts.
• All ARP high performance stud kits include ARP paste.
• Additional ARP screws for the bearing blocks

Features of the Cometic MLS head gasket

• Multi-layer metal head gasket
• 1.14mm for an optimum compression ratio of 8.5:1

In any case, we recommend reinforcing the valve drive with our valve springs and Ferrea/Supertech valves. You can find them further down at accesories.