1.8T Engine Tuning Guides
Tuning-Guide for 1.8T APY, AMK engines with 210 hp
You can more than double the performance of your Audi S3!
Average rating of 0 out of 5 stars
Ideal kit for daily use: The Sachs sports clutch kit with pads and single-mass flywheel made of steel (240 mm) for 6-speed gearbox (02M). This kit is for a continuous load of up to 530 Nm and thus super suitable for ambitious tuners!
As standard, a dual-mass flywheel is installed, which on the one hand is very heavy and on the other hand not suitable for high torque transmission. To avoid damage to your clutch and transmission, we recommend that you upgrade to this kit with a single flywheel.
The Sachs kit includes a reinforced pressure plate with special coating for better grip and a sprung clutch disc - organic or sintered. In addition, of course, the lightweight one-piece flywheel made of steel with a diameter of 240 mm.
You can choose between the organic or the sintered metal clutch disc for this kit.
Audi: AJQ, ARY, BAM, APX, APY, AMK
VW: AJM, ARL, AUQ, BLT (from 05/2004 ->), ASZ (from 11/2003 ->)
Please specify the engine code when ordering.
Attention: Spring pack of the coupling must be on the engine side.
When converting to a single-mass flywheel, rattling noises may occu in neutral..
However, these are harmless and occur in the transmission. As soon as the clutch is pressed, these noises disappear.
The only remedy is a harmonic vibration damper but the noises will not disappear completely.
In addition, of course, the pedal force increases, since the clutch is designed for higher torques.
Picture similar
Average rating of 0 out of 5 stars
1.8T Engine Tuning Guides
You can more than double the performance of your Audi S3!
With these power levels you can reach up to 666 hp!
Chip und Motortuning
Accessories
ZF Sachs
ZF Friedrichshafen AG
Obere Weiden 12, 97424 Schweinfurt, Germany
Ideal kit for daily use: The Sachs sports clutch kit with pads and single-mass flywheel made of steel (240 mm) for 6-speed gearbox (02M). This kit is for a continuous load of up to 530 Nm and thus super suitable for ambitious tuners!
As standard, a dual-mass flywheel is installed, which on the one hand is very heavy and on the other hand not suitable for high torque transmission. To avoid damage to your clutch and transmission, we recommend that you upgrade to this kit with a single flywheel.
The Sachs kit includes a reinforced pressure plate with special coating for better grip and a sprung clutch disc - organic or sintered. In addition, of course, the lightweight one-piece flywheel made of steel with a diameter of 240 mm.
You can choose between the organic or the sintered metal clutch disc for this kit.
Audi: AJQ, ARY, BAM, APX, APY, AMK
VW: AJM, ARL, AUQ, BLT (from 05/2004 ->), ASZ (from 11/2003 ->)
Please specify the engine code when ordering.
Attention: Spring pack of the coupling must be on the engine side.
When converting to a single-mass flywheel, rattling noises may occu in neutral..
However, these are harmless and occur in the transmission. As soon as the clutch is pressed, these noises disappear.
The only remedy is a harmonic vibration damper but the noises will not disappear completely.
In addition, of course, the pedal force increases, since the clutch is designed for higher torques.
Picture similar
Average rating of 0 out of 5 stars
1.8T Engine Tuning Guides
You can more than double the performance of your Audi S3!
With these power levels you can reach up to 666 hp!
Chip und Motortuning
Accessories
ZF Sachs
ZF Friedrichshafen AG
Obere Weiden 12, 97424 Schweinfurt, Germany