More Tuning Guides
Tuning-Guide for 1.8 TSI EA888 engines
Tuning guide for 1.8 TSI EA888 engines with standard 170 PS / 250 Nm.
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
The warranty takes effect from the date of purchase.
The warranty is void in the event of improper use and, in particular, in the following cases:
Our racing engines are excluded from the three-year warranty.
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
The warranty takes effect from the date of purchase.
The warranty is void in the event of improper use and, in particular, in the following cases:
Our racing engines are excluded from the three-year warranty.
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
Here you can download the warranty terms and conditions.
This set is ideal for performance-enhanced 1.8L TSI engines with chain. Included are high-quality Mahle forged pistons, ZRP I-shaft steel connecting rods and racing bearings from ACL. This allows you to put up to 650 hp on the road with your Golf 7, Audi TT etc.. without any problems.
All components of this set are perfectly matched and designed for the best racing feeling. Both piston and conrods are extremely light. The piston ensure smooth engine running and are provided with a special alloy, which enables low running clearance. This enables optimum power transmission.
The BAR-TEK i-beam conrods are milled from solid material and their construction makes them extremely strong and stable. Performance also comes into its own here: you can drive up to 900 hp with these connecting rods. At the same time, their weight is extremely low. An additional hole supplies the piston pins with sufficient oil. All in all, a great set that saves you money compared to the individual price.
Features of the MAHLE piston:
Features our i-beam conrods:
Features ACL connecting rod bearings:
Suitable for:
1.8L TSI engines with chain as installed in the Golf 7, Audi TT, Audi A5, Seat Leon and other 1.8L TSI engines.
Engine code letters: CJSA, CJSB, CABB, CDHB, CJEB, CDAA, DAJA
The specified compression is in conjunction with a stock-strength cylinder head gasket.
The illustration may differ.
Further information on the correct tightening of the connecting rod bolts HERE
Average rating of 0 out of 5 stars
Tuning guide for 1.8 TSI EA888 engines with standard 170 PS / 250 Nm.
Accesories
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
This set is ideal for performance-enhanced 1.8L TSI engines with chain. Included are high-quality Mahle forged pistons, ZRP I-shaft steel connecting rods and racing bearings from ACL. This allows you to put up to 650 hp on the road with your Golf 7, Audi TT etc.. without any problems.
All components of this set are perfectly matched and designed for the best racing feeling. Both piston and conrods are extremely light. The piston ensure smooth engine running and are provided with a special alloy, which enables low running clearance. This enables optimum power transmission.
The BAR-TEK i-beam conrods are milled from solid material and their construction makes them extremely strong and stable. Performance also comes into its own here: you can drive up to 900 hp with these connecting rods. At the same time, their weight is extremely low. An additional hole supplies the piston pins with sufficient oil. All in all, a great set that saves you money compared to the individual price.
Features of the MAHLE piston:
Features our i-beam conrods:
Features ACL connecting rod bearings:
Suitable for:
1.8L TSI engines with chain as installed in the Golf 7, Audi TT, Audi A5, Seat Leon and other 1.8L TSI engines.
Engine code letters: CJSA, CJSB, CABB, CDHB, CJEB, CDAA, DAJA
The specified compression is in conjunction with a stock-strength cylinder head gasket.
The illustration may differ.
Further information on the correct tightening of the connecting rod bolts HERE
Average rating of 0 out of 5 stars
Tuning guide for 1.8 TSI EA888 engines with standard 170 PS / 250 Nm.
Accesories
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany