Nissan 3.5L 24V VQ35DET High Performance Pistons-Kit MAHLE

MAHLE High Performance Pistons kit for Nissan 3.5L 24V VQ35DET engines.

We are proud to offer these pistons for the VQ35DET engines, which offer industry-leading features, OEM fitment, and OEM-like wear characteristics. These pistons are recommended for any high performance engine build, as they offer unparalleled strength and longevity.

Features:

• For 144.1x22mm conrods
• Borsize 95.50mm/8.5:1 or 96.00mm/8.6:1 available
• OEM fitment and wear characteristics
• Quite piston operation
• Ideal compression ratio and dish shape
• Durable forged pistons
• Lightweight piston design
• High strength German steel wrist pins for high horsepower support
• Propriety Mahle low-expansion 142P alloy
• Tight ring to piston groove clearances to reduce blow-by
• Hard anodized ring lands to avoid micro-welding
• Grafal anti-friction skirt coating
• Oil squirter notches that ensure no piston skirt to squirter interference

Fits for:

• Nissan 3.5L 24V VQ35DET engines

To maximize power output, the clearances between the rings and piston have been brought in very tightly to reduce blow by. This is achieved by hard anodizing the top ring lands, which prevents micro welding which could be caused otherwise.

To maintain OEM-like wear characteristics, these pistons are coated with Mahle’s Grafal skirt coating. This coating reduces friction on the skirts, keeping them quiet and from wearing over time- extending piston life. The grey appearance of these pistons is due to a phosphate coating. Providing a lubricant film in the pin bores and ring grooves, this coating is essential for initial startup and break-in of the engine to prevent micro welding and galling. Features like these are what allow these pistons to last for thousands of miles, just like OEM units.

Picture shows similar.