Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
H-shaft steel connecting rod suitable for BMW E46 M3 & Z4 M S54B32
- High Boost
- Milled from the solid
- Extremely light
- Very stable
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- high-strength 4340 steel
- milled from the solid
- suitable for extreme performance increases of 1000PS and more
- extremely light at just under 550g per conrods
- Magnaflux and FEA inspected
- 6 pieces per set
- Dimensions: 139 x 21 mm
- With ARP 2000 3/8" expansion bolts
- Fits for Fits for
- BMW 3er E46 | Year built 1998-2007 3.2 (S54) S54B32 | 343 hp (252 kW)
- BMW 3er E46 | Year built 1998-2007 3.2 (S54) S54B32HP | 360 hp (265 kW)
- BMW Z4 E85, E86 | Year built 2002-2008 M 3.2i S54B32 | 343 hp (252 kW)
- Videos Videos
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
H-beam connecting rods for all BMW S54B32 engines with 3.2L displacement and 139 x 21 mm conrods.
You need the steel connecting rods for performance upgrades, turbo or supercharger conversions and high-revving concepts, as the original conrods were not developed for high loads. The conrods are even durable up to 1000 hp!
The design of the H-beam conrods ensures that they can withstand extreme pressure loads. They have enormous rigidity and are therefore very stable. Although they are milled from solid material, they are also very light. This makes them ideal for motorsport, where every gram counts.
Features:
The BAR-TEK® H-shaft steel connecting rods stand for stability, performance and safety in every engine concept.
Further information on the correct tightening of the connecting rod bolts HERE
Average rating of 0 out of 5 stars
Login
Accesories
Average rating of 0 out of 5 stars
Immediate delivery!
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
H-beam connecting rods for all BMW S54B32 engines with 3.2L displacement and 139 x 21 mm conrods.
You need the steel connecting rods for performance upgrades, turbo or supercharger conversions and high-revving concepts, as the original conrods were not developed for high loads. The conrods are even durable up to 1000 hp!
The design of the H-beam conrods ensures that they can withstand extreme pressure loads. They have enormous rigidity and are therefore very stable. Although they are milled from solid material, they are also very light. This makes them ideal for motorsport, where every gram counts.
Features:
- high-strength 4340 steel
- milled from the solid
- suitable for extreme performance increases of 1000PS and more
- extremely light at just under 550g per conrods
- Magnaflux and FEA inspected
- 6 pieces per set
- Dimensions: 139 x 21 mm
- With ARP 2000 3/8" expansion bolts
The BAR-TEK® H-shaft steel connecting rods stand for stability, performance and safety in every engine concept.
Further information on the correct tightening of the connecting rod bolts HERE
- BMW 3er E46 | Year built 1998-2007 3.2 (S54) S54B32 | 343 hp (252 kW)
- BMW 3er E46 | Year built 1998-2007 3.2 (S54) S54B32HP | 360 hp (265 kW)
- BMW Z4 E85, E86 | Year built 2002-2008 M 3.2i S54B32 | 343 hp (252 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accesories
Average rating of 0 out of 5 stars
Immediate delivery!
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany