Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
4.0 TFSI EA824 H-beam conrods with ARP 2000 BAR-TEK®
- High Boost
- Billet
- extremely light & Very stable
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- high-strength milled from solid material
- suitable for extreme power increases up to approx. 1000 hp
- extremely light and very stable
- Magnaflux inspected
- 8 pieces per set
- Dimensions: 153 x 22 mm
- With ARP 2000 expansion screws 3/8"
- precisely angled and tested in-house
- Fits for Fits for
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CEUC | 420 hp (309 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CRDB | 560 hp (412 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CTGE | 450 hp (331 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CWUC | 605 hp (445 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CEUC | 420 hp (309 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CRDB | 560 hp (412 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CTGE | 450 hp (331 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CWUC | 605 hp (445 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) CEUA | 420 hp (309 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) CGTA | 520 hp (382 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) CTGA | 435 hp (320 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) DDTA | 605 hp (445 kW)
- Videos Videos
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
Innovative H-beam conrods for all 4.0L TFSI engines as installed in the Audi S6, S7, S8, RS6 and RS7.
Our H-beam conrods are ideally suited for performance-enhanced 4.0L TFSI engines. From 750 hp, you should definitely switch to our upgrade- conrods, as the standard connecting rods cannot always withstand the high load.
Thanks to the H-shaft design, these conrods are extremely rigid and can therefore withstand high boost pressures without bending. In addition to the stability, the performance of these conrods is also incredible: you can put up to 1000 hp on the road! Of course, not a single gram should be too much for the racetrack. That's why our conrods are also extremely light.
They are also precisely angled and tested by us. So you can rely on the safety of these conrods one hundred per cent! The conrods come with ARP 2000 expansion bolts. We have summarised for you how to tighten the connecting rod bolts correctly.
For an optimum set, you should order the matching conrod bearing shells directly with your order.
Features of our H-beam conrods:
The conrods do not have a trapezoid and are therefore not suitable for series piston
Further information on the correct tightening of the connecting rod bolts.
Average rating of 0 out of 5 stars
Login
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Innovative H-beam conrods for all 4.0L TFSI engines as installed in the Audi S6, S7, S8, RS6 and RS7.
Our H-beam conrods are ideally suited for performance-enhanced 4.0L TFSI engines. From 750 hp, you should definitely switch to our upgrade- conrods, as the standard connecting rods cannot always withstand the high load.
Thanks to the H-shaft design, these conrods are extremely rigid and can therefore withstand high boost pressures without bending. In addition to the stability, the performance of these conrods is also incredible: you can put up to 1000 hp on the road! Of course, not a single gram should be too much for the racetrack. That's why our conrods are also extremely light.
They are also precisely angled and tested by us. So you can rely on the safety of these conrods one hundred per cent! The conrods come with ARP 2000 expansion bolts. We have summarised for you how to tighten the connecting rod bolts correctly.
For an optimum set, you should order the matching conrod bearing shells directly with your order.
Features of our H-beam conrods:
- high-strength milled from solid material
- suitable for extreme power increases up to approx. 1000 hp
- extremely light and very stable
- Magnaflux inspected
- 8 pieces per set
- Dimensions: 153 x 22 mm
- With ARP 2000 expansion screws 3/8"
- precisely angled and tested in-house
The conrods do not have a trapezoid and are therefore not suitable for series piston
Further information on the correct tightening of the connecting rod bolts.
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CEUC | 420 hp (309 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CRDB | 560 hp (412 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CTGE | 450 hp (331 kW)
- Audi A6 / S6 / RS6 C7 | Year built 2011-2018 4.0 TFSI (EA824) CWUC | 605 hp (445 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CEUC | 420 hp (309 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CRDB | 560 hp (412 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CTGE | 450 hp (331 kW)
- Audi A7 / S7 / RS7 C7 (4G) | Year built 2010-2018 4.0 TFSI (EA824) CWUC | 605 hp (445 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) CEUA | 420 hp (309 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) CGTA | 520 hp (382 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) CTGA | 435 hp (320 kW)
- Audi A8 / S8 D4 (Type 4H) | Year built 2009-2017 4.0 TFSI (EA824) DDTA | 605 hp (445 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany