We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
1.8L and 2.0L TSI all-round carefree kit with ARP stud bolt for main bearing blocks and the M8 screws for side mounting of the bearing blocks.
An absolute MUST for all engines that run with increased boost pressure! ARP is the market leader in this field and offers you stud bolt for the engine block made of 8740 chromoly steel with rounded threads. These are up to 30% stronger than the standard bolts. We supply the kit complete with the side mounting bolts for the main bearing blocks. Once again, high-strength ARP screws are used here. Quality and safety are guaranteed!
The complete kit comes with a bag of moly paste and installation instructions.
Tightening torque in 3 stages as standard. Last stage 95Nm. Tighten the M8 screws with 30Nm.
The smaller nuts must be fitted where space does not permit otherwise.
All nuts must fully cover the stud bolt, otherwise please unscrew the stud bolt by approx. 5mm from the block.
Please use plenty of ARP paste!
Included in the kit:
M10 ARP stud bolt with nuts
M8 screws (picture similar)
ARP Paste
Suitable for:
all 2.0 TSI EA888 Gen.2 motors with chain
all 2.0 TSI EA888 Gen.3 motors of the MQB series
all 2.0 TSI EA888 Evo4 engines
all 1.8L TSI EA888 engines
Manufacturer
Information about the manufacturer
ARP
Automotive Racing Products, Inc.
1863 Eastman Avenue, Ventura, CA 93003, United States
1.8L and 2.0L TSI all-round carefree kit with ARP stud bolt for main bearing blocks and the M8 screws for side mounting of the bearing blocks.
An absolute MUST for all engines that run with increased boost pressure! ARP is the market leader in this field and offers you stud bolt for the engine block made of 8740 chromoly steel with rounded threads. These are up to 30% stronger than the standard bolts. We supply the kit complete with the side mounting bolts for the main bearing blocks. Once again, high-strength ARP screws are used here. Quality and safety are guaranteed!
The complete kit comes with a bag of moly paste and installation instructions.
Tightening torque in 3 stages as standard. Last stage 95Nm. Tighten the M8 screws with 30Nm.
The smaller nuts must be fitted where space does not permit otherwise.
All nuts must fully cover the stud bolt, otherwise please unscrew the stud bolt by approx. 5mm from the block.
Please use plenty of ARP paste!
Included in the kit:
M10 ARP stud bolt with nuts
M8 screws (picture similar)
ARP Paste
Suitable for:
all 2.0 TSI EA888 Gen.2 motors with chain
all 2.0 TSI EA888 Gen.3 motors of the MQB series
all 2.0 TSI EA888 Evo4 engines
all 1.8L TSI EA888 engines
Manufacturer
Information about the manufacturer
ARP
Automotive Racing Products, Inc.
1863 Eastman Avenue, Ventura, CA 93003, United States