2.5 TFSI EA855 evo Cupra Formentor VZ5 brake upgrade kit 382 x 36 mm MOV'IT

You also want to drive your Cupra quickly and reliably? Unfortunately, the original Cupra brakes are not designed for hard use. Even if they say Cupra on them and the OE system is relatively large, you know the feeling that after several brakings the pedal becomes very soft and the braking performance decreases massively.

We have found an experienced partner to tackle the problem!

Maximum braking performance. All of this is even street legal and (almost) freely configurable.

A powerful brake system is one of the most important factors in high‑performance vehicles. Because if you get up to speed quickly, you also need to be able to come to a stop quickly in an emergency.

The MOV’IT upgrade brakes were specially developed for high thermal loads and combine performance, durability, weight and everyday usability at the highest level.

Thanks to larger brake discs, optimized cooling and a two-piece design, braking performance is significantly increased and the typical problems of the stock system, such as heat build-up, fading or warping, are reliably eliminated.

Features:

• For Akebono brake calipers
• Two-piece brake discs with aluminum hat
• reduced rotating mass
• improved agility
• optimized ventilation system
• up to 80% larger cooling surface
• directional ventilation
• no heat build-up, no judder
• Special alloy with high thermal conductivity
• Very high fading resistance even under heavy load

The bundles are composed as follows:

Bundle 1:

• 2-piece drilled MOV’IT brake discs in 382 × 36 mm
• Aluminum brake hat
• Brake caliper adapter
• Mounting hardware
• Component approval certificate

Bundle 2:

• 2-piece drilled MOV’IT brake discs in 382 × 36 mm
• Aluminum brake hat
• Depending on selection, MOV’IT Comfort, Sport or Pro Endurance brake pads
• Brake caliper adapter
• Mounting hardware
• Component approval certificate

Bundle 3:

• 2-piece drilled MOV’IT brake discs in 382 × 36 mm
• Aluminum brake hat
• Depending on selection, MOV’IT Comfort, Sport or Pro Endurance brake pads
• Steel braided brake lines
  
• Brake caliper adapter
• Mounting hardware
• Component approval certificate

Attention: All upgrade kits require at least 19-inch wheels.

The MOV’IT Comfort brake pads are quiet, produce little dust, and offer very good cold and everyday performance.

Coefficient of friction of 0.42µ (Comfort)

Optimal temperature range from 0 - 500°C