These are innovative I-beam steel connecting rods from BAR-TEK® for all 2.0L TSI EA888 2nd and 3rd generation engines (MQB) with chain. These connecting rods are definitely indispensable from a power output of 300 hp, because the series connecting rods cannot withstand this high load.
The ZRP I-Beam steel connecting rods are incredibly robust and have enormous bending stability. At the same time they are super light. Not a gram wasted here! This makes them very popular with tuning fans, especially for extreme performance upgrades: You can increase the performance of your Audi S3, Golf MK7 GTI, Golf MK7 R etc. enormously: These connecting rods can withstand up to 1000 hp without any problems!
With an additional bore (rifle drilled), the 2.0L TSI connecting rods also ensure perfect lubrication of the piston pins. This prevents abrasion, which is beneficial for the engine. Before the connecting rods leave our bearings, they are precisely angled and tested. So you can rely on their stability and safety.
The connecting rods of course come with the 3/8" ARP 2000 expansion bolts and the matching ARP assembly paste.
Features I-Beam connecting rod:
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions: 144 x23 mm
With ARP 2000 expansion bolts 3/8"
ARP Assembly paste
With additional bore for piston pin lubrication (Riffle drilled)
The connecting rods fit into the following motors with 144 x 23 mm con-rods:
VW / Audi / Seat / Skoda with 2.0L TSI EA888 chain engine#
These are innovative I-beam steel connecting rods from BAR-TEK® for all 2.0L TSI EA888 2nd and 3rd generation engines (MQB) with chain. These connecting rods are definitely indispensable from a power output of 300 hp, because the series connecting rods cannot withstand this high load.
The ZRP I-Beam steel connecting rods are incredibly robust and have enormous bending stability. At the same time they are super light. Not a gram wasted here! This makes them very popular with tuning fans, especially for extreme performance upgrades: You can increase the performance of your Audi S3, Golf MK7 GTI, Golf MK7 R etc. enormously: These connecting rods can withstand up to 1000 hp without any problems!
With an additional bore (rifle drilled), the 2.0L TSI connecting rods also ensure perfect lubrication of the piston pins. This prevents abrasion, which is beneficial for the engine. Before the connecting rods leave our bearings, they are precisely angled and tested. So you can rely on their stability and safety.
The connecting rods of course come with the 3/8" ARP 2000 expansion bolts and the matching ARP assembly paste.
Features I-Beam connecting rod:
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions: 144 x23 mm
With ARP 2000 expansion bolts 3/8"
ARP Assembly paste
With additional bore for piston pin lubrication (Riffle drilled)
The connecting rods fit into the following motors with 144 x 23 mm con-rods:
VW / Audi / Seat / Skoda with 2.0L TSI EA888 chain engine#