2.0 TSI EA888 evo4 Cupra Leon, Ateca, Formentor brake upgrade kit 380 x 32 mm MOV'IT

Do you also want to drive your Cupra quickly and reliably? Unfortunately, the original Cupra/Audi brakes are not designed for hard use. Even if it says Cupra on it and the OE system is relatively large, you know the feeling that after several braking maneuvers the pedal becomes very soft and the braking performance drops off massively.

We have found an experienced partner to tackle the problem!

Maximum braking performance. All this even road legal and (almost) freely configurable.

A powerful brake system is one of the most important factors in high‑performance vehicles. Because anyone who is fast needs to be able to come to a stop quickly in an emergency.

The MOV’IT upgrade brakes were specially developed for high thermal loads and combine performance, durability, weight and everyday usability at the highest level.

By using larger brake discs, optimized cooling and a two‑piece design, braking performance is significantly increased and the typical problems of the standard system, such as heat build‑up, fading or warping, are reliably eliminated.

Features:

• Two‑piece brake discs with aluminum hat
• reduced rotating mass
• improved agility
• optimized ventilation system
• up to 80% larger cooling surface
• directional ventilation
• no heat build‑up, no juddering
• Special alloy with high thermal conductivity
• Very high fading resistance even under heavy loads

The bundles are composed as follows:

Bundle 1:

• Two‑piece drilled MOV’IT brake discs in 380 × 32 mm
• Aluminum brake hat
• Brake caliper adapter
• Fastening hardware
• Type approval documentation

Bundle 2:

• Two‑piece drilled MOV’IT brake discs in 380 × 32 mm
• Aluminum brake hat
• Depending on selection, MOV’IT Comfort, Sport or Pro Endurance brake pads
• Brake caliper adapter
• Fastening hardware
• Type approval documentation

Bundle 3:

• Two‑piece drilled MOV’IT brake discs in 380 × 32 mm
• Aluminum brake hat
• Depending on selection, MOV’IT Comfort, Sport or Pro Endurance brake pads
• Stainless steel braided brake lines
  
• Brake caliper adapter
• Fastening hardware
• Type approval documentation

Attention: All upgrade kits require at least 19‑inch wheels.

The MOV’IT Comfort brake pads are quiet, generate little dust, and offer very good cold and everyday performance.

Coefficient of friction of 0.42µ (Comfort)

Optimal temperature range from 0 - 500°C