Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Upgrade carbon air intake suitable for BMW S58B30 G8X M2/M3/M4 Infinity Design
- up to 20 hp more power
- 100% precision fit
- better throttle response
- plug & play
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- OEM fitment
- CFD optimized
- 100% pre‑preg carbon
- Enlarged turbo inlets
- Triple air feed
- High flow air filters
- up to 15–20 hp increase in power
- Improved throttle response
- No software tuning required
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- accesories accesories
- Recommendations
- GSPR GSPR
The S58 engine, introduced with the G series, has proved to be a real gem. The tuning potential is gigantic.
For the M2, M3 and M4 models of the G series, Infinity has comprehensively optimized the intake system: not only was the air intake newly designed, but larger turbo inlets were also installed.
In addition, three cold air feeds per side were implemented – in contrast to the single feed of the stock system.
The first feed uses the factory air intake at the front. The second is also a front feed, positioned in an area where only ambient air is drawn in. The third feed is particularly interesting.
This design concept ensures maximum air supply while maintaining the lowest possible intake temperature.
The result is an impressive look in the engine bay, combined with a more spontaneous and more linear throttle response. In addition, more torque is available more quickly, and the intake sound is both refined and distinctive under load.
The complete air intake was developed using CFD analysis.
The results show an even, turbulence‑free airflow. The filter straightens the air and enables the Venturi intake pipe to draw in large volumes of air at high speed. Both components work independently of each other and thus create the largest intake funnel of all intake systems currently available.
The turbo inlets are significantly larger than the stock parts and are designed to smooth the airflow and increase the flow velocity towards the turbocharger blades.
Features:
Average rating of 0 out of 5 stars
Login
Manufacturer
Information about the manufacturer
Infinity Design
INFINITY DESIGN ENG LTD
20-22 Wenlock Road, London, England, N1 7GU
The S58 engine, introduced with the G series, has proved to be a real gem. The tuning potential is gigantic.
For the M2, M3 and M4 models of the G series, Infinity has comprehensively optimized the intake system: not only was the air intake newly designed, but larger turbo inlets were also installed.
In addition, three cold air feeds per side were implemented – in contrast to the single feed of the stock system.
The first feed uses the factory air intake at the front. The second is also a front feed, positioned in an area where only ambient air is drawn in. The third feed is particularly interesting.
This design concept ensures maximum air supply while maintaining the lowest possible intake temperature.
The result is an impressive look in the engine bay, combined with a more spontaneous and more linear throttle response. In addition, more torque is available more quickly, and the intake sound is both refined and distinctive under load.
The complete air intake was developed using CFD analysis.
The results show an even, turbulence‑free airflow. The filter straightens the air and enables the Venturi intake pipe to draw in large volumes of air at high speed. Both components work independently of each other and thus create the largest intake funnel of all intake systems currently available.
The turbo inlets are significantly larger than the stock parts and are designed to smooth the airflow and increase the flow velocity towards the turbocharger blades.
Features:
- OEM fitment
- CFD optimized
- 100% pre‑preg carbon
- Enlarged turbo inlets
- Triple air feed
- High flow air filters
- up to 15–20 hp increase in power
- Improved throttle response
- No software tuning required
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Information about the manufacturer
Infinity Design
INFINITY DESIGN ENG LTD
20-22 Wenlock Road, London, England, N1 7GU