Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Average rating of 0 out of 5 stars
2.5 TFSI EA855 upgrade CNC Billet intake manifold BAR-TEK®
- for services from 650 hp
- no more coking
- original injectors still fit
- 5 additional injectors in the inlet duct
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- for outputs from 650 hp
- original injection nozzles can be retained
- 5 additional injection nozzles in front of the intake port
- perfect spray pattern for optimum engine running
- no more coking in the intake and valve area
- completely milled from high-strength aluminium CNC
- including 5 injection nozzles
- including fuel rail made of aluminium
- Plug&Play fits between cylinder head & manifold
- Fits for Fits for
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 2.5 TFSI (EA855) CEPA | 340 hp (250 kW)
- Audi A3 / S3 / RS3 8V | Year built 2012-2020 2.5 TFSI (EA855) CZGB | 367 hp (270 kW)
- Audi Q3 / RS Q3 8U | Year built 2011-2018 2.5 TFSI (EA855) CTSA | 310 hp (228 kW)
- Audi Q3 / RS Q3 8U | Year built 2011-2018 2.5 TFSI (EA855) CZGA | 340 hp (250 kW)
- Audi Q3 / RS Q3 8U | Year built 2011-2018 2.5 TFSI (EA855) CZGB | 367 hp (270 kW)
- Audi TT / TTS / TT RS 8J | Year built 2006-2014 2.5 TFSI (EA855) CEPA | 340 hp (250 kW)
- Audi TT / TTS / TT RS 8J | Year built 2006-2014 2.5 TFSI (EA855) CEPB | 360 hp (265 kW)
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
Racing intake manifold for outputs from 650 hp for all 2.5L TFSI engines as installed in the Audi RS3 & TTRS.
With additional injection nozzles in the intake ducts, you can continue to use your original injection nozzles at outputs above 650 hp. Another major advantage is that you eliminate coking of the intake ducts and valves. This means you no longer have any oil carbon residue in the intake and valve area - so you always have full power and safety from damage caused by coking.
Advantages:
Features:
Additional electronics or a freely programmable injection system must be fitted so that the additional injection nozzles can be controlled.
picture similar.
Average rating of 0 out of 5 stars
Login
Accesories
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Racing intake manifold for outputs from 650 hp for all 2.5L TFSI engines as installed in the Audi RS3 & TTRS.
With additional injection nozzles in the intake ducts, you can continue to use your original injection nozzles at outputs above 650 hp. Another major advantage is that you eliminate coking of the intake ducts and valves. This means you no longer have any oil carbon residue in the intake and valve area - so you always have full power and safety from damage caused by coking.
Advantages:
- for outputs from 650 hp
- original injection nozzles can be retained
- 5 additional injection nozzles in front of the intake port
- perfect spray pattern for optimum engine running
- no more coking in the intake and valve area
Features:
- completely milled from high-strength aluminium CNC
- including 5 injection nozzles
- including fuel rail made of aluminium
- Plug&Play fits between cylinder head & manifold
Additional electronics or a freely programmable injection system must be fitted so that the additional injection nozzles can be controlled.
picture similar.
- Audi A3 / S3 / RS3 8P, 8PA | Year built 2003-2013 2.5 TFSI (EA855) CEPA | 340 hp (250 kW)
- Audi A3 / S3 / RS3 8V | Year built 2012-2020 2.5 TFSI (EA855) CZGB | 367 hp (270 kW)
- Audi Q3 / RS Q3 8U | Year built 2011-2018 2.5 TFSI (EA855) CTSA | 310 hp (228 kW)
- Audi Q3 / RS Q3 8U | Year built 2011-2018 2.5 TFSI (EA855) CZGA | 340 hp (250 kW)
- Audi Q3 / RS Q3 8U | Year built 2011-2018 2.5 TFSI (EA855) CZGB | 367 hp (270 kW)
- Audi TT / TTS / TT RS 8J | Year built 2006-2014 2.5 TFSI (EA855) CEPA | 340 hp (250 kW)
- Audi TT / TTS / TT RS 8J | Year built 2006-2014 2.5 TFSI (EA855) CEPB | 360 hp (265 kW)
Average rating of 0 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
Accesories
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
