Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
Average rating of 5 out of 5 stars
Universal oil catch tank BAR-TEK®
- Anodised aluminium
- BILLET
- reduces coking
- High Boost!
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
- Improper installation or maintenance.
- Opening the turbocharger or removing seals.
- Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
- Use of unsuitable or incorrect lubricants.
- Damage caused by the ingress of foreign objects.
- Leaks in the boost pressure system.
- Contaminants in the oil.
- Blocked engine ventilation.
- Increased exhaust back pressure.
- Inadequate dimensioning of the intake or other components.
- Theft, accidents, or flooding.
- Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
- Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
- If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
- In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Here you can download the warranty terms and conditions.
- Description Description
- Made entirely from anodised aluminium
- Milled from the solid
- Dimensions: 140mm x 80mm (400ml volume)
- 1/2" NPT to Dash 10 connections
- No contamination of the intake valves and the intake tract
- No more idle fluctuations due to dirty throttle valves
- The collected oil is filtered and can be drained off
- Drain plug in the base
- Black anodised and elegant finish
- with dipstick for easy reading (dipstick)
- Fits for Fits for
- Questions about the product Questions about the product
- Reviews Reviews
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
- Accesories Accesories
- Recommendations
- GSPR GSPR
Keep your engine clean. Especially from the inside.
Best aluminium oil catch tank on the market from BAR-TEK® Motorsport, universally applicable for almost all vehicles
With our catchtank, the oil vapours from the crankcase ventilation are no longer fed back into the intake tract. The filtered oil is collected in the tank.
This drastically reduces coking of the intake valves, especially in direct injection engines.
Available as an open or closed catchtank.
The advantages of this system are:
With our various brackets you have maximum freedom when mounting.
(Image shows fittings and brackets. The catch tank is supplied with only two 1/2" NPT to Dash 10 connections. For the open catch tank, the vent filter should be ordered separately. See accessories.)
Note on use in cold climates:
The Catch tank is only designed for a warm climate.
In winter at temperatures below 0C°, the condensation that forms in the system can freeze. This would result in increased crankcase pressure, which can lead to engine damage. We recommend checking the catchtank system more frequently in winter or removing it completely for the cold period.
Average rating of 5 out of 5 stars
Login
3 reviews
3 February 2022 00:00
Review with rating of 5 out of 5 stars
Top Qualität, super Verarbeitung, tolle Opti
Top Qualität, super Verarbeitung, tolle Optik ... nur eine kurze Anleitung (=> Offnen, Ölablassen, Drehmomente der Verschaubung, ...) wäre noch schön.
3 February 2022 00:00
Review with rating of 5 out of 5 stars
Top Qualität, super Verarbeitung, tolle Opti
Top Qualität, super Verarbeitung, tolle Optik ... nur eine kurze Anleitung (=> Offnen, Ölablassen, Drehmomente der Verschaubung, ...) wäre noch schön.
Source:
SHOPVOTE
18 February 2021 00:00
Review with rating of 5 out of 5 stars
Super Qualität (Quelle:
Super Qualität
Source:
SHOPVOTE
Accesories
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Keep your engine clean. Especially from the inside.
Best aluminium oil catch tank on the market from BAR-TEK® Motorsport, universally applicable for almost all vehicles
With our catchtank, the oil vapours from the crankcase ventilation are no longer fed back into the intake tract. The filtered oil is collected in the tank.
This drastically reduces coking of the intake valves, especially in direct injection engines.
Available as an open or closed catchtank.
The advantages of this system are:
- Made entirely from anodised aluminium
- Milled from the solid
- Dimensions: 140mm x 80mm (400ml volume)
- 1/2" NPT to Dash 10 connections
- No contamination of the intake valves and the intake tract
- No more idle fluctuations due to dirty throttle valves
- The collected oil is filtered and can be drained off
- Drain plug in the base
- Black anodised and elegant finish
- with dipstick for easy reading (dipstick)
With our various brackets you have maximum freedom when mounting.
(Image shows fittings and brackets. The catch tank is supplied with only two 1/2" NPT to Dash 10 connections. For the open catch tank, the vent filter should be ordered separately. See accessories.)
Note on use in cold climates:
The Catch tank is only designed for a warm climate.
In winter at temperatures below 0C°, the condensation that forms in the system can freeze. This would result in increased crankcase pressure, which can lead to engine damage. We recommend checking the catchtank system more frequently in winter or removing it completely for the cold period.
Average rating of 5 out of 5 stars
Login
-
Fast shopping
-
Save your user data and settings
-
Insight into your orders incl. shipment information
-
Manage your garage and cars
3 reviews
3 February 2022 00:00
Review with rating of 5 out of 5 stars
Top Qualität, super Verarbeitung, tolle Opti
Top Qualität, super Verarbeitung, tolle Optik ... nur eine kurze Anleitung (=> Offnen, Ölablassen, Drehmomente der Verschaubung, ...) wäre noch schön.
3 February 2022 00:00
Review with rating of 5 out of 5 stars
Top Qualität, super Verarbeitung, tolle Opti
Top Qualität, super Verarbeitung, tolle Optik ... nur eine kurze Anleitung (=> Offnen, Ölablassen, Drehmomente der Verschaubung, ...) wäre noch schön.
Source:
SHOPVOTE
18 February 2021 00:00
Review with rating of 5 out of 5 stars
Super Qualität (Quelle:
Super Qualität
Source:
SHOPVOTE
Accesories
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
