We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
3 Years Warranty
3 Years Warranty
Warranty conditions for BAR-TEK® and Turbo-Total products
Regardless of statutory warranty claims, we offer a voluntary three-year warranty on our BAR-TEK® products and Turbo-Total brand performance turbochargers. This warranty covers defects in materials and workmanship. The statutory rights of the consumer ("warranty holder") remain unaffected by this warranty.
1. Commencement of the warranty:
The warranty takes effect from the date of purchase.
2. Exclusions from the warranty:
The warranty is void in the event of improper use and, in particular, in the following cases:
Improper installation or maintenance.
Opening the turbocharger or removing seals.
Incorrect engine tuning, such as... B. due to excessive boost pressure or excessive exhaust gas temperature.
Use of unsuitable or incorrect lubricants.
Damage caused by the ingress of foreign objects.
Leaks in the boost pressure system.
Contaminants in the oil.
Blocked engine ventilation.
Increased exhaust back pressure.
Inadequate dimensioning of the intake or other components.
Theft, accidents, or flooding.
Exceeding the maximum permissible turbo speed.
Our racing engines are excluded from the three-year warranty.
3. Warranty Claims:
In the event of a warranty claim, we have the right to either replace or repair the defective part. Claims beyond repair are not accepted. Claims by the warranty holder due to intentional or grossly negligent conduct on our part, our agents, or legal representatives, as well as claims for injury to life, body, or health, remain unaffected.
4. No Transfer of Warranty:
The warranty applies exclusively to the original purchaser. In particular, it does not apply in the case of resale or gifting.
5. Notification and Handling of Warranty Claims:
Material and manufacturing defects covered by the warranty must be reported within the warranty period. The warranty claim must be reported in writing (e.g., by letter or email) within one month of its occurrence. The date of receipt of the notification by us is decisive for compliance with the deadline.
If the repair or replacement is covered by the warranty, the customer bears the costs of shipping to and from the warrantor.
In the case of a defect not covered by the warranty, the warranty holder bears the costs of the repair. In this case, we will inform the warranty holder and provide a cost estimate for the repair. The repair will only be carried out with the express consent of the warranty holder.
Our V3 500+ upgrade turbocharger for over 500 hp for the 2.0 TSI EA888 Gen.3 engine.
Really bang and that with just a little boost pressure: With our new V3 Turbo, we drive a proud 485 hp in our Golf 7 GTI at just 1.8 bar boost pressure - and that "unfaked"! The elaborately developed compressor wheel, which is milled CNC and precisely fitted into the optimised compressor housing, contributes to this.
Designed for extreme performance, this upgrade turbocharger is actually neither a upgrade nor a hybrid turbocharger. All components of the turbocharger are of extremely high quality and made from the finest materials. In addition to the compressor housing specially manufactured for this turbocharger, an exhaust housing made of high-strength stainless steel with a larger exhaust flow rate is used. The latest technology can be found underneath the housing. As a special highlight, a specially developed, reverse-rotating high-performance fuselage assembly is used, which is comparable to the performance of a GTX3071R.
The exhaust housing has a maximum exhaust flow rate and has been specially manufactured for the high-quality fuselage assembly. A heat-resistant stainless steel was chosen as the material, which is also absolutely rustproof!
The duct routing is adapted for maximum performance and is flow-optimised down to the last detail, which also increases durability to a maximum.
Another advantage: all downpipes fit the outlet of the exhaust housing without any problems.
Features of the V3 500+ turbocharger:
CNC milled compressor wheel
CNC optimised compressor housing
Special compressor geometry
Optimised exhaust wheel
Motorsport bearing
Finely balanced
Customised intake pipe
With upgrade blow off valve
Optimised for performance from 500-560 hp
At 1.8 Bar boost pressure already 485 hp in our test Golf
Plug and play wiring kit included
Turbo inlet including TÜV certificate
The original blow off valve is included in the scope of delivery.
The software must be adapted. We also recommend our downpipe, suction, high pressure pump and intercooler.
You can keep your old turbocharger. No replacement necessary. This allows you to rebuild the vehicle if necessary. This ultimately saves a lot of time and money.
Made in Germany!
Picture similar!
We now offer a 3-year guarantee on this Turbo-Total upgrade - turbocharger! As we are convinced of our products beyond measure, we offer you this extra service. Thanks to our more than 30 years of experience at Turbo-Total and the constant exchange and close cooperation with Garrett, we can offer you this extra service. You can find more information about the guarantee here.
Do you have questions about the product?Just start the chat, we will help you with your product selection.
Our V3 500+ upgrade turbocharger for over 500 hp for the 2.0 TSI EA888 Gen.3 engine.
Really bang and that with just a little boost pressure: With our new V3 Turbo, we drive a proud 485 hp in our Golf 7 GTI at just 1.8 bar boost pressure - and that "unfaked"! The elaborately developed compressor wheel, which is milled CNC and precisely fitted into the optimised compressor housing, contributes to this.
Designed for extreme performance, this upgrade turbocharger is actually neither a upgrade nor a hybrid turbocharger. All components of the turbocharger are of extremely high quality and made from the finest materials. In addition to the compressor housing specially manufactured for this turbocharger, an exhaust housing made of high-strength stainless steel with a larger exhaust flow rate is used. The latest technology can be found underneath the housing. As a special highlight, a specially developed, reverse-rotating high-performance fuselage assembly is used, which is comparable to the performance of a GTX3071R.
The exhaust housing has a maximum exhaust flow rate and has been specially manufactured for the high-quality fuselage assembly. A heat-resistant stainless steel was chosen as the material, which is also absolutely rustproof!
The duct routing is adapted for maximum performance and is flow-optimised down to the last detail, which also increases durability to a maximum.
Another advantage: all downpipes fit the outlet of the exhaust housing without any problems.
Features of the V3 500+ turbocharger:
CNC milled compressor wheel
CNC optimised compressor housing
Special compressor geometry
Optimised exhaust wheel
Motorsport bearing
Finely balanced
Customised intake pipe
With upgrade blow off valve
Optimised for performance from 500-560 hp
At 1.8 Bar boost pressure already 485 hp in our test Golf
Plug and play wiring kit included
Turbo inlet including TÜV certificate
The original blow off valve is included in the scope of delivery.
The software must be adapted. We also recommend our downpipe, suction, high pressure pump and intercooler.
You can keep your old turbocharger. No replacement necessary. This allows you to rebuild the vehicle if necessary. This ultimately saves a lot of time and money.
Made in Germany!
Picture similar!
We now offer a 3-year guarantee on this Turbo-Total upgrade - turbocharger! As we are convinced of our products beyond measure, we offer you this extra service. Thanks to our more than 30 years of experience at Turbo-Total and the constant exchange and close cooperation with Garrett, we can offer you this extra service. You can find more information about the guarantee here.
Do you have questions about the product?Just start the chat, we will help you with your product selection.