2.0L TSI Gen.3B MQB Polo GTI & Audi A1 OPF Chiptuning Software APR

The APR Stage 1 ECU Upgrade is the first step for more performance! And all that with certification!

This simple upgrade requires no modifications to the engine hardware and produces 255 HP and 430 Nm torque (at 98 octane), depending on the selected octane number. To achieve even more power, the vehicle can be equipped with an improved turbo inlet, intercooler and exhaust system without the need for new changes to the ECU. The APR Stage 1 is available for the octane ratings 95 RON, 98 RON and 102 RON.

With APR software, you've made a start to give your TSI more power. A simple and safe thing to tune your vehicle. In addition, the APR software gives you a solid foundation for all further tuning measures. If you want to upgrade later on to generate even more power, for example with a downpipe and high pressure pump from APR, you can upgrade this software at no extra cost. If you want to upgrade with hardware components that are not from APR, for example a downpipe from another manufacturer, you can do so for an additional charge of 449 €.

Here's an example: If you have upgraded the Stage 1 software to Stage 2 and now want to install a larger turbocharger, you will get the software upgrade for free.

Features Software Stage 1:

• For original hardware
• Optimized to 255 HP
• Increased torque to 430 Nm
• Upgrade to all APR hardware components Free of charge
• Support from APR Cologne base

For 2.0L Turbo EA888 Gen.3B engine with engine code DKZC

APR Chiptuning by bar-tek Motorsport. Either by appointment at our premises (near Cologne) or by sending in your control unit.

The APR software is a purchase for the whole TSI life. You are supplied from level 1 - Open End!