Universal oil cooler kits
In our shop, you will find universal oil cooler kits for retrofitting. These are absolutely essential for tuned engines with extremely high performance. Here, the thermal load is so high that the original coolers won’t cut it. To ensure that all components can give it their best, they must be optimally cooled and lubricated. This aspect is dealt with by our BAR-TEK® oil cooler kits and also the coolers from Racimex and Setrap. Coolers have different numbers of rows, however. Depending on the power and space available, you install oil coolers with 13, 14, 16, 19, or 25 rows.
Oil cooler kits for maximum power
The oil cooler is responsible for cooling the engine oil. Because oil has a higher boiling point than water, it is ideally suited to cool engine parts exposed to extreme heat loads. This includes, for example, your pistons. In addition, the oil serves to optimally lubricate the engine and its components. Our oil cooler kits come with different numbers of rows and can be used universally. Depending on how much space you have, you can install the Racimex oil cooler with 25 rows, for example. This allows you to lower the oil temperature by up to 30 °C. If you have a tuned engine, these oil coolers are a must-have for top performance. This also keeps your oil pressure constant and your engine gaskets cannot harden. The result: an extended service life for your engine.
All-in-one package: oil cooler with lines and flange
A good oil cooler rarely comes alone. From us, you can get complete kits containing the oil cooler, lines, flange, gaskets, and everything else. Just pick the number of cooling plates you need. The universal BAR-TEK® oil cooler kits also include the oil cool flange developed in house. It includes a thermostat, allowing you to keep an eye on the temperature at all times. Go ahead and install our temperature and oil pressure display to view these parameters. The kits also contain finished, steel-cased lines that are perfectly suited for the extreme performance boost.