2.5L TFSI Audi RS3 8V & TTRS 8S Intake Kit Carbon Turbo Inlet APR

The APR intake kit outperforms the factory-fitted components by up to 45%. More flow, more power - this is the first step you should take if you want to optimise the intake area.

The APR intake kit with turbo inlet consists of a massive 4" (101.6 mm) carbon intake pipe, which is connected to the original air filter box or the APR Air Intake. The beautiful carbon pipe is followed by the high-quality, also 4" (101.6 mm) cast aluminium turbo inlet, which is organically designed to maintain the largest possible cross-section within the pipe up to the turbocharger intake. Despite the visually extravagant shape, maintaining the cross-sectional area is the key to increased performance.

The interlocking adapter rings form an ideal connection to the turbocharger, while larger adapter rings (optionally available) allow connection to even larger turbocharger upgrades.

Last but not least, the APR air filter completely transforms the system from subtle to extreme. The massive 9-inch front opening cotton filter connects to a 6-inch carbon tube that gradually connects to the 4-inch intake tube.
You'll hear every bit of air from the massive airflow requirement of the 5-end, with a 60% improvement in CFM over the stock system! Simply put, this is the best intake system on the market to meet the uncompromisingly high airflow requirements.

Including TÜV certificate.

Features:

• 45% more airflow
• Optimised design
• 4 inch pipe to turbo - ideal for performance-enhanced cars
• made entirely from carbon fibre
• perfect fitting accuracy
• cool intake air
• better response behaviour
• simple plug and play installation
• also available individually including TÜV certificate

Please specify when ordering whether an adapter is required.

• APR 59.5mm adapter ring for TTE625 v.1 Turbo (+€19.90)
• APR 62.8mm adapter ring for TTE625 v.2 & TTE700 Turbo (+€19.90)
• APR 66.0mm adapter ring for GTX3582 Turbo (+€19.90)

When fitting, it is important to apply a drop of Loctite 246 or similar to these screws as described in the APR hardware instructions for the inlet, otherwise they may even fall out due to vibrations etc..

Please note: for APR articles with an expert opinion, the VIN must always be specified in order to issue the expert opinion for the respective vehicle.
The VIN is specified during the ordering process, where you are given the opportunity to enter an order comment, please enter the VIN there.